Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

o2 sensor wiring

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

o2 sensor wiring

Post by short stuff »

I need to replace my o2 sensor so bought a new one today with out a plug
so i was going to cut and join to old one but whats the colour code

green
yellow
black
black
Top
Posts: 39
Joined: Wed Aug 03, 2005 1:48 pm
Location: mansfield vic

Post by paulv1818 »

Hi, did mine a few months ago and from memory
green = ground
yellow = ecu
black = heater
black = heater

just check for continuity with the green wire to the chassis. that will confirm that green = ground.
Top
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

Post by short stuff »

thanks
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests