Are they the same?
More so will a hilux one work on an 80?
Its a 93 GXL.
I know the bearings are the same, I measured to double check.
I know the inner wheel bearing seal is the same, Also measured to check.
The diameter of the spindel is the same write down to the thread for the nut.
The bolt pattern is the same.
But what is different is,
the depth of the inner seal seat. The 80 one comes out further from the housing.
The 80 one is over all (from brass bush at the back to the end of the thread) 10mm shorter then hilux.
The overall diameter of the spinel at the bolt holes is 8mm smaller on the 80.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 series and Hilux spindels?
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 2 guests