Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

warn free spool handle

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

warn free spool handle

Post by ausoops »

ive got a m800 and the freespool fouls on the winch bar when trying to unlock the clutch. i know i can spin the clutch around but that would put the freespool at the back in a pita spot to reach. ive seen the freespool 'switch' that is on the tabor/magnum range but arb dont/wont sell one (no spares for magnum winches apparently).

what have other people used in place of the original warn handle?
swb safari
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

I have the same prob with my M8000, previous owner ground a schamfer on the lever so it just clears the opening in the bar .
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

yeah, if push comes to shove i'll just take to the handle with the grinder, it only needs 9-10mm of material off one edge to clear the hole in the bar.
swb safari
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

just take the handle out and get an oxy heat it and bend it up a little till it clears the bar etc
www.overkill4x4.com
ph 94766137
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Is it a full steel handle or big plastic knob on the end?

I replaced the plastic knob in my M10000 with a rubber stop from a walking stick (Clarke Rubber style)

(not the best pics but you get the idea)
Image
KRiS
Top
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

They can be bent and there isalso a longer handle available.
:rofl: :popcorn: :snipersmile:
Top
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

you wouldn't know the part number for the longer handle?
swb safari
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Just give it a tap to bend it.

Bazzle
Top
Posts: 579
Joined: Mon May 29, 2006 4:36 pm
Location: Melbourne

Post by bigcam »

i have the switch style lever you are after (well it's danks) but he wanted the bigger handle so im sure we can sort out a swapsie, from a magnum 9k im pretty sure, they look the same as an xd9000 inside though. PM me and ill text him.

cam
[quote="75 cruser"]we want more donkey[/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests