Hi Fella's (and any sheila's out there),
I'm looking at putting a 2H in my son's 45, which currently has a stuffed H motor. Does anyone know exactly what else I need to change (apart from the gearbox and rear mount which is fairly obvious). For example is the starter the same? Do I need to change wiring etc. and what about the front engine mounts? -things like that.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
H motor to 2H conversion
Moderators: toaddog, Elmo, DUDELUX
I would get a donor 60 series thats rotted out or rolled over, and go down that road, run the gearbox, t-case, all electrics and steering from the new truck, maybe even the A/C if you get motivated.
You will need fuel pump, accelerator cable, glow plug relay, fuel control relay, etc etc etc.... grab the exhaust too, and the air box/intake, radiator if you can as its all different.
Get one with a P/S pump on it too.
You will need fuel pump, accelerator cable, glow plug relay, fuel control relay, etc etc etc.... grab the exhaust too, and the air box/intake, radiator if you can as its all different.
Get one with a P/S pump on it too.
hands and mums dont count!!!
Who is online
Users browsing this forum: No registered users and 1 guest