Question about alternator brackets

[N*A*M]

Are the alternator brackets the same between the 1L and the 1.3L? Are there other compatible brackets (Vit, Swift, Barina etc...)

Just want to put in a bigger alt and want to build the brackets before ripping all of the existing stuff out.

I've just put in an Odyssey dry cell battery.

[christover1]

the alternators are totally different, so I assume the brackets are? hope you know the one litre is external regulated, and 1.3 is internal, so some bypassing of the regulator and rewiring will be needed. I will try to check my old one litre junk tomorrow , see if anything is same, christover

[christover1]

my engine is a swift, its bracket looks same as 1.3, it is same alternator
1600 is a higher out put, internal reg, but I sure it same as 1300, cos block is the same...just guessing

[Beastmavster]

my engine is a swift, its bracket looks same as 1.3, it is same alternator
1600 is a higher out put, internal reg, but I sure it same as 1300, cos block is the same...just guessing

The pulleys and offsets can be different, but can usually be swapped no hassles..

I found the best alternatior for the 1.6 is the EFI 1300 one - easy access to brushes and all that

[N*A*M]

what's the output on on the 1300 EFI alt?

[Beastmavster]

what's the output on on the 1300 EFI alt?

Dunno... if I find a nice water crossing to wash all the mud off i'll tell you ;D

it'll be higher than the carby 1.6 I'm pretty sure, due to having all the electronic stuff to run like Injectors high pressure pump and power windows and all.

I'll have a look tomorrow morning for badges.

It's been enough to keep my 180W stereo, 130/100 headlights plus spotties going fine, even if I don't start the car for a fortnight at a time sometimes.