Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Where to get uni joint made?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Where to get uni joint made?
Does anyone know of somewhere in melbourne where i could get a uni joint to join the spines in the picture below together?
went there dressed up, came back messed up
81 FJ40 hardtop - Lexus 1UZ-FE conversion underway
81 FJ40 hardtop - Lexus 1UZ-FE conversion underway
Good luck! - I Don't think you'd find anything like that.
I think you'd be better getting the 55 spline welded onto the 75 shaft and use the 55 uni.
Engineers hate cut steering shafts, but if you had a professional welder do the job, and it was subject to and x-ray and MPI examination there's no reason why it wouldn't be acceptable to an engineer.
Steve.
I think you'd be better getting the 55 spline welded onto the 75 shaft and use the 55 uni.
Engineers hate cut steering shafts, but if you had a professional welder do the job, and it was subject to and x-ray and MPI examination there's no reason why it wouldn't be acceptable to an engineer.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
ring 0732757600, ask for ALEX,tell him piglet recomended you,,
he is the manager of driveline services,they have stores all over AUS
& can fabricate most of that weird stuff
he is the manager of driveline services,they have stores all over AUS
& can fabricate most of that weird stuff
DAIHATSU FEROZA UTE,V6,caged,lokd 35's
NOW SOLD
& then
GQ DUAL CAB TUFF UTE,caged,lokd,35's
NOW SOLD
& then
JK WRANGLER 4 DOOR TUFF TOURER,lifted,lokd, 35s
NOW SOLD
& then
GQ DUAL CAB TUFF UTE,caged,lokd,35's
NOW SOLD
& then
JK WRANGLER 4 DOOR TUFF TOURER,lifted,lokd, 35s
Thanks for the help guys, i'll try out a few of those options tomorrow.
BJ: Pics of the build can be found at: http://forum.mudrhino.com.au/viewtopic. ... 9&start=30
PM me if you're after specific stuff.
Cheers,
Adam.
BJ: Pics of the build can be found at: http://forum.mudrhino.com.au/viewtopic. ... 9&start=30
PM me if you're after specific stuff.
Cheers,
Adam.
went there dressed up, came back messed up
81 FJ40 hardtop - Lexus 1UZ-FE conversion underway
81 FJ40 hardtop - Lexus 1UZ-FE conversion underway
You will b hard pressed finding 1 off the shelf as its a steering specific uni not a normal uni joint as per driveshafts. Is there a shaft that fits between the 2 ? as its easier to use stock uni's each end with the shaft having different ends to suit. Or use a steering shaft of the same vehicle fitted to the column.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
It's not the uni that's the problem, its the yokes - judging by spline size, I'm guessing the 55 uni has a larger overall diameter AND a larger cap diameter, so the uni basically wouldn't function even if it could be made - It would bind because the velocities are different for each yoke, but in any case, ther're wont be any sort of part number for it. Just my guess.
If both unis (75 and 55) are the same OD and use the same cap, the yes, hardy spicer or someone will be able to sell you a uni, and your're away.
I replaced the steering uni in my G years ago with an in stock item from spicer. Merc wanted $850 for a steering shaft - one $40 uni and I was away - never given any trouble since!
I still come back to talking to your engineer and splicing the shaft as the easy way around the problem.
Steve.
If both unis (75 and 55) are the same OD and use the same cap, the yes, hardy spicer or someone will be able to sell you a uni, and your're away.
I replaced the steering uni in my G years ago with an in stock item from spicer. Merc wanted $850 for a steering shaft - one $40 uni and I was away - never given any trouble since!
I still come back to talking to your engineer and splicing the shaft as the easy way around the problem.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
There is some good info here in this thread- http://www.outerlimits4x4.com/phpBB2/vi ... hp?t=46390
ended up getting a 75 steering column today nice and cheap. This has two uni's, 1/2 of one has the smaller 75 spline and 1/2 of the other has the 55 spline - both have the same diameter end caps. So i took the two yokes to a drive shaft guy today and he's going to check he can get the correct size uni to fit it all up tomorrow, will see how we go.
went there dressed up, came back messed up
81 FJ40 hardtop - Lexus 1UZ-FE conversion underway
81 FJ40 hardtop - Lexus 1UZ-FE conversion underway
Who is online
Users browsing this forum: No registered users and 161 guests