Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Weight of bull bars

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 143
Joined: Sat Nov 11, 2006 8:11 pm
Location: Sydney

Weight of bull bars

Post by tritontray »

Hi,
Could someone let me know the approximate weight for a navara size steel bull bar. obviously not specifically a navara bar, but is it 50, 60, 70kg?I need to let the transport company know who is delivering it for me.
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

call the manufacturer. we dont know how much the specific bar that you purchased from a specific company to fit your specific year model vehicle is going to weigh.
Posts: 143
Joined: Sat Nov 11, 2006 8:11 pm
Location: Sydney

Post by tritontray »

a navara sized bar would come under the category of hilux bar, triton bar, courier bar, bravo bar....thanks for your help *&^%wit. this place is a really bad if you want to know something thats got nothing to do with 8 inch lifted patrols and cruisers. and i mentioned it dodn't need to be specifically navara.
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

No need to start getting shitty mate.
It is a fair call.
You really do need to be more specific.
Is it a steel bar or an ally one?
Is it a winch bar?
Is it a complete bumper replacement bar or just a wrap around original bumper?
There is a lot of variables to take into account.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 143
Joined: Sat Nov 11, 2006 8:11 pm
Location: Sydney

Post by tritontray »

Sorry but its not the first time I have come up against dick heads in here, although now I guess I am one of them too.

Steel
No winch
Full replacement
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

At a very rough guess I would say around 40-50kg
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 143
Joined: Sat Nov 11, 2006 8:11 pm
Location: Sydney

Post by tritontray »

Thanks for that.
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Post by oozuk »

tritontray wrote:Sorry but its not the first time I have come up against dick heads in here, although now I guess I am one of them too.

Steel
No winch
Full replacement
with replys like that i'm not suprised why where not stepping over ourselfs to help you.... :roll:
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: Weight of bull bars

Post by 80's_delirious »

tritontray wrote:Hi,
Could someone let me know the approximate weight for a navara size steel bull bar. obviously not specifically a navara bar, but is it 50, 60, 70kg?I need to let the transport company know who is delivering it for me.
IMO there is enough info provided by tritontray (hilighted) for someone to be able to give a helpful response. I would gladly answer his first query, only I dont know the answer.

my 2c
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

tritontray wrote:a navara sized bar would come under the category of hilux bar, triton bar, courier bar, bravo bar....thanks for your help *&^%wit. this place is a really bad if you want to know something thats got nothing to do with 8 inch lifted patrols and cruisers. and i mentioned it dodn't need to be specifically navara.
lucky i just found out the answer to your question cause i was going to get one freighted to here! but damn i just forgot how much the weight was :roll:

but on another note and a bit of a hijack, does anyone know if the courier 2001 bar is compatible with any other vehicle please? any help would be greatly appreciated tnaks in advance!
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Posts: 1379
Joined: Mon May 07, 2007 8:28 pm
Location: West of Woodridge, North of Ipswich, South of Oxley, East of Wacol

Post by chikoroll_ »

tritontray wrote:Sorry but its not the first time I have come up against dick heads in here
old news....this place is full of dickheads.... just ignore them, there are few decent ones (although few and far between)
'98 Jackaroo
Bullbar, 32" muddies, Homebrew Timber centre console, Homebrew 3" Stainless rubber bend snorkel, Homebrew Steel rear bumper, Campervan interior
Posts: 106
Joined: Wed Dec 19, 2007 10:11 pm
Location: Sydney

Post by carrot »

chikoroll_ wrote:
tritontray wrote:Sorry but its not the first time I have come up against dick heads in here
old news....this place is full of dickheads.... just ignore them, there are few decent ones (although few and far between)
Good call! :D And that applies everywhere, not just here.

BTW, I don't know the answer to your original question. I would have guessed 20-25kg, but I really don't know! I reckon my tube bar will be about 10-15km when I'm done with it.
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

i got a t15 steel winch bar for my gq and it was at a guess 20-25kgs max, i could lift it with one hand no worries.
swb safari
Posts: 264
Joined: Wed Aug 22, 2007 1:24 am
Location: Perth

Post by nabstud »

I got a genuine nissan steel winch bar for my gu patrol, prob 40ishkg. I guess yours will be smaller therefore lighter, maybe 30-40kg.
Posts: 143
Joined: Sat Nov 11, 2006 8:11 pm
Location: Sydney

Post by tritontray »

Thanks for all the replys. and all the defences as well!

As it turns out, it is an aluminium bar that is coated in a black hammer tone. Hence why I thought it was steel (I only had digital photos to go from) the wecker guy told me its weight.......Maybe start a guessing game on Aluminium bars! its 21kg anyway.

Thanks again for all your help.
Last edited by tritontray on Wed Jan 16, 2008 9:33 pm, edited 1 time in total.
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
Posts: 446
Joined: Wed Jan 02, 2008 8:50 am
Location: Mackay, Sunshine State

Re: Weight of bull bars

Post by clm434 »

80's_delirious wrote:
tritontray wrote:Hi,
Could someone let me know the approximate weight for a navara size steel bull bar. obviously not specifically a navara bar, but is it 50, 60, 70kg?I need to let the transport company know who is delivering it for me.
IMO there is enough info provided by tritontray (hilighted) for someone to be able to give a helpful response. I would gladly answer his first query, only I dont know the answer.

my 2c
:rofl: I thought that was plenty of info too. I suppose some people are just too ignorant to read the WHOLE question before shooting someone down. :bad-words: Hey, anyone for a job with Vic police??? (only kidding) :D
Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests