Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lifting widetrack flares

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 1242
Joined: Fri Oct 17, 2003 8:50 pm
Location: Kanwal

lifting widetrack flares

Post by ZOOK60 »

just wanted to know if any one had lifted their flares to gain more tyre clerance . if so how much and how did you go about it
P.E.T.A
People eating tasty animals.
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

N*A*M has just done this although he hasnt put the flairs back on

there are plenty of sites out on the net on how to do it
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

love_mud has done it pretty cleanly
Posts: 169
Joined: Tue Sep 23, 2003 1:37 pm
Location: New Zealand home of the warriors

Re: lifting widetrack flares

Post by Luigi Malone »

jake lawson wrote:just wanted to know if any one had lifted their flares to gain more tyre clerance . if so how much and how did you go about it


I lifted my front flares some years ago as I thought they were cutting my tyres. Twas the inner guard eh?
You need to drill the spot welds out and repair the rust that is bound to be underneath.
I then raised about 1.5 inches and just silastic sealed them back on and drilled three holes for 6mm bolts to secure them. One each end and one in the middle. Worked fine.
LM
It's better to have LIVED for a day than to have EXISTED for a hundred years.
Post Reply

Who is online

Users browsing this forum: No registered users and 32 guests