Hi all, I'm new to the group and chasing some information/help/advice? I have a 2.8 turbo diesel GQ Patrol in which I've been very happy with thus far. I'm looking for mods to improve it, mainly interested in hearing from the guys who have been there and done it with these issues. Thinking of intercooling it, and possibly putting it on the new diesel gas system. Any advice on these things or other ideas that have been done would be great. Cheers.
Richard
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2.8 GQ Mods?
I would be interested to hear what a "good" exhaust is for a 2.8 GQ. Also would it be best to get done before or after the intercooler or doesn't matter? There was a good thread a few months back which I just found here which gives some good suggestions on g etting more power out of a 2.8 without selling it and buying a 4.2 1930s designed donk.
http://www.outerlimits4x4.com/phpBB2/vi ... p?t=119828
http://www.outerlimits4x4.com/phpBB2/vi ... p?t=119828
I haven't got one but would love to put one on. I would be looking more toward a front mount to avoid the need for a body lift if you put on a top mount of a GU. Aparently the one of a 3.0 litre is quite a good fit on a gq though if you wanted to think about a body lift.Spoon It wrote:How do you go about the intercooler though? Spoken to a few place and they have indicated it to be, too hard. Has anyone done it before and how?
Do this and you will be more than satisfied:
Following engine mods:
big GT2871R.86AR bb turbo
12mm plunger from a german made MAN truck. pump is set up to deliver 100cc of fuel.
injectors set to 155ats
3" dump/exhaust
custom plenum chamber( velocity stacks inside)
3" IC pipes
Big FMIC
Powershot LPG injection
Snow Performance Water/meth injection
Big kn airfilter
Exedy xtreme clutch
Puts out around 250hp/500nm. My latest mods was water injection and I`m very happy with the power increase.
Following engine mods:
big GT2871R.86AR bb turbo
12mm plunger from a german made MAN truck. pump is set up to deliver 100cc of fuel.
injectors set to 155ats
3" dump/exhaust
custom plenum chamber( velocity stacks inside)
3" IC pipes
Big FMIC
Powershot LPG injection
Snow Performance Water/meth injection
Big kn airfilter
Exedy xtreme clutch
Puts out around 250hp/500nm. My latest mods was water injection and I`m very happy with the power increase.
Who is online
Users browsing this forum: No registered users and 0 guests