Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Sierra Rebuild
Sierra Rebuild
My sierra just blew its bottom end on the way back from land cruiser park a cpl days ago. I am now looking to up grade the engine, i was thinking a 1.6L. vitara. Anyone kno a good wrecker that would have an engine?
Was out at Ipswich Spare Parts (wrecker) on the Warrego Highway yesterday, and they were wrecking an early Vitara. It did not have a carby though, and was the one with the 3 speed auto (Trimatic I belive).
Dont have a clue what they would want for it, and dont know what sort of condition it was in, short of the missing carby.
Dont have a clue what they would want for it, and dont know what sort of condition it was in, short of the missing carby.
Wheeling on completely wicked angles, without even looking stable.
After a searching for a week there has been a change of plans, instead of getting a 1.6l vitara engine, i will rebuild my 1.3L because of the long waiting list on parts. Im getting the rebuild at suzi sport in albion, they are about a $1000 cheaper than anywhere else i have looked. Should have my zuke back on the road next week 

all gaskets, main and big end bearings, pistons, rings and the little caps that stop oil going past your valves but can't think of the name right now.
i'm doing a in car rebuild are the engine isn't that old (broke a piston as it has a hair dryier on it) so the only thing i can't get at is the main bearings witch are fine.
i'm doing a in car rebuild are the engine isn't that old (broke a piston as it has a hair dryier on it) so the only thing i can't get at is the main bearings witch are fine.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
zook4fun wrote:all gaskets, main and big end bearings, pistons, rings and the little caps that stop oil going past your valves but can't think of the name right now.
i'm doing a in car rebuild are the engine isn't that old (broke a piston as it has a hair dryier on it) so the only thing i can't get at is the main bearings witch are fine.
Valve Stem Seals

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests