OK, well after getting my troll stuck in a mudbog yesterday, that was deep enough to be over the bonnet and pouring in the bonnet scoops, the carpets in the Troll needed a good steam cleaning today, but most of the dirt and mud - and WATER - is still under the carpet.
I could just open her up and let her dry out, and maybe vacuumn and steam clean it a few more times, but since I'm about to get the seat mount holes welded up, I need to pull the carpet out before the welding anyway.
So looks like I'm about to have to strip the entire vehicle of seats and stuff and get the whole carpet out.
Since I have to do THAT, then I may as well just leave it out and not bother putting it back in, and use some paint on product to replace the carpet, and at the same time have the benefit of being a rustproof coating that carpet isn't.
I have searched out the threads in here on hardliner, which looks like it would be awesome, and was something I always wanted to use to replace the flooring in my zook, but other threads on the subject mention a heap of other products such as septone body deadener.
Without carpet, the troll will need a product that is also - to at least some extent - a sound proofer as well, so the Body deadener MIGHT be ok, but being bitumen based, I wonder if it gets sticky in hot weather, it seems to primarily be an underbody product where sticky in the heat wouldn't be an issue, but sticky in the heat would be a real issue inside a vehicle.
So,
* Are there any tips I need to know for removing carpet?
* Is there any chance of hosing the carpet off, cleaning it up as much as possible, and putting it back in succesfully, or is it likely to shrink/stretch/warp etc?
* What product would you suggest as a replacement for flooring and carpetting INSIDE a vehicle? Considering that just a few I've searched up are, "Hardliner", "Wurth Stone Guard", "Soundoff", "Dynamat Dynashield" and a dozen or more other products, it becomes a pretty hard choice?
* Is septone likely to get tacky or sticky in heat?
* Is Hardliner likely to deaden any noises.
* Maybe a number of products, one for inside for wear and tear resistance, and one under the vehicle for noise.
Yes, I know that decarpetting is a nasty thing to do to the luxury Ti model Patrol, with all the flash niceties in carpet, velour, fancy trim etc. But in all honesty resale value is not really an issue here, but function and maybe even rust protection, are much more important. Especially when you have the stupid habit of sinking the darned things in water.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Removing carpet and possible paint on alternatives ?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Removing carpet and possible paint on alternatives ?
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
Thanks, I'll look online and see if it will be suitable for INSIDE a vehicle.jtraf wrote:use POR15 and never have to do it again........
use google and find a retailer to buy it from near you.....
This is the stuff all the hot rodders paint on the bottom of there cars cause it is rust and chip resistant.
W
I found this thread once I found to look for bedliner.
http://answers.google.com/answers/threadview?id=62723
It looks to be a compilation of products and reviews of them.
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
Be careful with herculiner - some of the retailers of it here in Australia can have old stock and it pretty much sets in the bottom of the cans. We did two cars about 18 months ago or so and the stuff was lumpy and inconsistent, even after mixing with a power drill mixer for so long we wore out a bucket.
I did my Gwagen in it years and years ago (maybe 1999?) and it has been excellent. I wouldn't hesitiate in recommending it if you can get fresh stuff.
Steve.
I did my Gwagen in it years and years ago (maybe 1999?) and it has been excellent. I wouldn't hesitiate in recommending it if you can get fresh stuff.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
God of Magnificant Ideas!
Ditch the carpet 
Best and by far the cheapest replacement.......
STONEGUARD ( available at all auto shops )
we use it in the bash cars and they get a far harder time than the average 4x4 that does go offroad !
One car has been in Stoneguard for 5 years now...... it has 1 chip but has not yet worn through under the divers feet position.
$19 a 1lit can.........
2 cans do a std sedan type vehicle.
clean the surface ( NO sanding required)
Spray on
wait a day
done
Kingy
Best and by far the cheapest replacement.......
STONEGUARD ( available at all auto shops )
we use it in the bash cars and they get a far harder time than the average 4x4 that does go offroad !
One car has been in Stoneguard for 5 years now...... it has 1 chip but has not yet worn through under the divers feet position.
$19 a 1lit can.........
2 cans do a std sedan type vehicle.
clean the surface ( NO sanding required)
Spray on
wait a day
done
Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
OK, well after stupidly being up till 2am searching this topic.
I did a search on google images last night for "Herculiner" which is one brand that you do yourself, and that has been recommended by a number of people.
Plenty of images of it inside vehicles.
Even some of vehicles that have had the whole car painted with it.
And for those wondering if it would slowly get inground dirt in it and turn brownish, this photo looks like it's been in for a bit longer than the other images that look like they were taken when the paint was new.
This appears to have aged at least as well as most flooring would.
Looks like this product could be a winner.
Now to find where to buy it, and how much.
Oh and you can do as many coats as you like apparently, some have talked of SIX coats, others seem to do 2 or 3. But if it was to prevent heat and sound, I'd imagine the more coats the better.
I did a search on google images last night for "Herculiner" which is one brand that you do yourself, and that has been recommended by a number of people.
Plenty of images of it inside vehicles.
Even some of vehicles that have had the whole car painted with it.
And for those wondering if it would slowly get inground dirt in it and turn brownish, this photo looks like it's been in for a bit longer than the other images that look like they were taken when the paint was new.
This appears to have aged at least as well as most flooring would.
Looks like this product could be a winner.
Now to find where to buy it, and how much.
Oh and you can do as many coats as you like apparently, some have talked of SIX coats, others seem to do 2 or 3. But if it was to prevent heat and sound, I'd imagine the more coats the better.
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
Lynx were the distributor (same guys who distribute splitfire plugs etc) but I can't stress enough how important it is that its fresh. If its gone off there's NOTHING you will be able to do.
It does not stain, but it isn't the easiest to clean either - the best way is to hose and scrub, then use a set vac to suck all the the water out, otherwise the dirt stays in the the texture.
It's pretty impervious to solvents etc once set too.
Steve.
It does not stain, but it isn't the easiest to clean either - the best way is to hose and scrub, then use a set vac to suck all the the water out, otherwise the dirt stays in the the texture.
It's pretty impervious to solvents etc once set too.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
I had no problems as the foam is attached to the carpet and came out with the carpet.
The weird furry stuff was only in a few small spots where the carpet had been glued to the body, and it pretty much washed out the door when I hosed out the car.
It came up pretty clean actually.
You can see the results of the clean up in this thread:
Why shouldn't you play in bog holes ?
Mind you, I've hung the carpets on the line and hosed them, carpet cleaner'ed them, hosed them again, hosed them again, hosed them again, and after six months supply of water has been wasted, I'm STILL getting muddy water out of the carpets.
So looks like I'll be trying to find myself some Herculiner real soon.
The weird furry stuff was only in a few small spots where the carpet had been glued to the body, and it pretty much washed out the door when I hosed out the car.
It came up pretty clean actually.
You can see the results of the clean up in this thread:
Why shouldn't you play in bog holes ?
Mind you, I've hung the carpets on the line and hosed them, carpet cleaner'ed them, hosed them again, hosed them again, hosed them again, and after six months supply of water has been wasted, I'm STILL getting muddy water out of the carpets.
So looks like I'll be trying to find myself some Herculiner real soon.
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
did u find it a kmart,
found this have ask them for australian stockest so will let you know,
http://www.herculiner.com/index.html
http://www.247autoparts.com/store/herculiner.html
found this have ask them for australian stockest so will let you know,
http://www.herculiner.com/index.html
http://www.247autoparts.com/store/herculiner.html
http://photobucket.com/frby69
Just call them:Gwagensteve wrote:Lynx were the distributor (same guys who distribute splitfire plugs etc)
Lynx Corporation has moved and now trading from the New South Wales Central Coast.
Our new address is
12 Bonnal Road
ERINA New South Wales 2250
Australia
PH : 61 2 4367 0522
FAX : 61 2 4365 6077
Steve
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
SO long as it's a urethane based product or similar not the bitumen based stuff - that gets soft when its hot, soft when you spill oil on it, soft when you lean something heavy on it.... I speak from experience - 
Steve.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Chipguard
Ive just bought and used some chipguard called Tex Coat 4313. The Body shop sell it for $15 a spray can (only did a small area).
Gives a good hard textured finnish with only a couple of light coats. Looks the shiz
Gives a good hard textured finnish with only a couple of light coats. Looks the shiz
Thats strange it works fine for me an Im not registered? Are you getting a message that say something like "register so you gain access to over 1 million posts........." I get that message but the thread is just a bit further down the pageEzookiel wrote:Won't let me read it without registering, it actually takes you to a splurb explaining that you need to register.Jaffa wrote:You dont have to register to read it, and it is worth a read
http://www.explorerforum.com/forums/sho ... genumber=1
Brendan
So excited to hear and see this herculiner stuff!
Got a 40 shorty and 75 troopy that would love a coat. Got into contact with Lynx Dsitributors and they said none available and sounded very unsure if they were goiung to get a container of it again. And if so at least 3 - 4 months which just sounded like they were blowing me off.
Ive tried to contact Herculiner via email direct in the states but no reply.
Does anyone know where I can possibly get some in Oz? If not what is the neext best product to achieve a similar finish? Ive tried all the pressure pack type options and they are OK but want the best. My 40 is fibreglass too so need an option good for this. Anyones previous experience and advice greatly appreciated!
Currently refitting troopy and need a solution asap as would be very easy to apply now.
Anyones previous experience and advice other thanb already mentioned on thread greatly appreciated!
Got a 40 shorty and 75 troopy that would love a coat. Got into contact with Lynx Dsitributors and they said none available and sounded very unsure if they were goiung to get a container of it again. And if so at least 3 - 4 months which just sounded like they were blowing me off.
Ive tried to contact Herculiner via email direct in the states but no reply.
Does anyone know where I can possibly get some in Oz? If not what is the neext best product to achieve a similar finish? Ive tried all the pressure pack type options and they are OK but want the best. My 40 is fibreglass too so need an option good for this. Anyones previous experience and advice greatly appreciated!
Currently refitting troopy and need a solution asap as would be very easy to apply now.
Anyones previous experience and advice other thanb already mentioned on thread greatly appreciated!
May the best of your past be the worst of your future and it's only illegal if you get caught!
If you want the best:Grumpy Stumpy wrote: If not what is the neext best product to achieve a similar finish? Ive tried all the pressure pack type options and they are OK but want the best. My 40 is fibreglass too so need an option good for this. Anyones previous experience and advice greatly appreciated!
Currently refitting troopy and need a solution asap as would be very easy to apply now.
Anyones previous experience and advice other thanb already mentioned on thread greatly appreciated!
http://www.rhinolinings.com.au/
It's pricey and professionally applied, but miles better than herculiner.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 50 guests