YES I've done a search!!! TO NO AVAIL!!!
Can any one tell me what wires to bridge @ the regulator or how to wire in a 90's barina multi v alternator in my 83 sierra orig 1.0ltr now import barina 1.3(1298cc)???
plug on sierra @ alternator end:
..........blk wire- E_
wht/grn wire - F l l N -wht/blk
same colors @ reg end!!
plug on barina alternator:
.. D _
IG- l l -L
Need this to work as old alt shagged this one near new!!!
Pics , diagrams anything appreceiciated thanx!!!
Sorry bout drawings!!!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
90's Barina Alternator into Sierra HELP!!
How hard did you search? It's even in the bible. 
http://carl.outerlimits4x4.com/viewtopi ... alternator
Steve.
http://carl.outerlimits4x4.com/viewtopi ... alternator
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Thanks Steve I looked @ that one but wasn't sure if the EL set up was different ? any Ideas about the alternater plug end which wire goes to which? Yours was a 1ltr too your wiring code should be same?Gwagensteve wrote:How hard did you search? It's even in the bible.
http://carl.outerlimits4x4.com/viewtopi ... alternator
Steve.
Yep 1 Lt.
The info in the thread will work for you as Christover has a swift alternator.
if in doubt, just swap the wires at the alternator, but the regulator patch is correct regardless.
Chris might be able to shed more light on what's hooked to what on his swift alternator.
Steve.
The info in the thread will work for you as Christover has a swift alternator.
if in doubt, just swap the wires at the alternator, but the regulator patch is correct regardless.
Chris might be able to shed more light on what's hooked to what on his swift alternator.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
I'll give that a go thanx again your help much appreceiated!Gwagensteve wrote:Yep 1 Lt.
The info in the thread will work for you as Christover has a swift alternator.
if in doubt, just swap the wires at the alternator, but the regulator patch is correct regardless.
Chris might be able to shed more light on what's hooked to what on his swift alternator.
Steve.
basically the alternators are the same , the IG wire is the important it is the one that supplies the power to the alternator to excite the diodes (im not trying to be funny by that statement either), and charge the battery from the main terminal , if there isnt t least 8 volt or more going to the ig wire the diodes will not tell the reg to start charging. if you look at the pins you have two vertical and one horizontal pin , the pin that is vertical to the left of the horizontal pin is the ig , the other vertical is the L which is for the light on the dash
I know it's the soft option, but i took mine to an auto elec. He had to machine some off the back of the sierra pulley to get it to sit so the belt was flush. He checked and connected all the wires, bench tested it all. As long as i took it out of the 'zook and put it back in, he only charged me $30.
Too easy i reckon.
Puk
Too easy i reckon.
Puk
96 Jeep Cherokee Sport
Who is online
Users browsing this forum: No registered users and 121 guests