Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

got 37" for my lwb sierra need help

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Posts: 14
Joined: Sun Oct 14, 2007 8:00 am
Location: gold coast australia

got 37" for my lwb sierra need help

Post by kurtzook »

hey guys i need some help ive recently bought a lwb zook and she's got some mods. lock rear 29's winch custom bar's. but ive bought some 37" x 14.5" and i was going to put them on hilux lockers. ive figured that i have to do a spring over and lift the body but i dont know how much i have to lift the body buy and what sort of spring over kit to buy or shocks. i was going to cut the rear of the shell of and build a custom tray inside the wheels and cut the front archers out so clearance isnt a problem but i think the i have to keep the weight lower to the ground has any body got any advice please?
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

37 X 14.5" on a zook :rofl: :rofl: :rofl:
Competition Zooks might run 37's but nobody put 14.5" wides on a zook unless they're in Florida swamps.
If you did fit tyres like that you'd need to beef up (replace) the transfer and motor/gearbox just to turn them.
Posts: 14
Joined: Sun Oct 14, 2007 8:00 am
Location: gold coast australia

Post by kurtzook »

ive got a new transfer case coming from the states which will turn them and i was going to stick a different engine in maby a rotor or even a rangey v8 something with a fair bit of torque i was going to use it for the mud and swamp runs up in nt and out near warwick etc
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

I reckon you should sell the LWB Zook as they are in demand for their space and ride.
Buy a (Shoot me) Hilux and drop a 302 EFI Windsor into it.
You'll find a lux is already S.O.A, already has lux diffs, much easier to fit big tyres to and will be better balanced with a V8 than a Zook.
Posts: 14
Joined: Sun Oct 14, 2007 8:00 am
Location: gold coast australia

Post by kurtzook »

is it hard to get reduction gears for transfer case for them and is it expensive
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

buggy time............
Posts: 14
Joined: Sun Oct 14, 2007 8:00 am
Location: gold coast australia

Post by kurtzook »

thanks that is cheap and they would turn the wheels easy if i upgrade the engine?
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

So are you going to sell the Sierra? If so let me know :armsup: :armsup:
;)
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

I seriously think anyone who can manage to fit these tyres on a zook properly will not need to be asking questions on here. I agree that most if not all of the driveline will need to be binned and upgraded for stronger/larger stuff, and by the time that's all done the chassis may even need bracing to cope with the extra loads required to run those tyres. Seriously those size tyres on a zook is Tuff truck competitor territory and should be left to those in the know. Sell them and buy some 33's or smaller and you may have a chance.
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

kurtzook wrote:thanks that is cheap and they would turn the wheels easy if i upgrade the engine?
I think gears for Toyota's(from Locktup etc)only reduce the ratio of low range and not high.
A V8 will turn 37's in mud in high range without a problem. You can always change the diff centres if needed.
Posts: 572
Joined: Thu Mar 31, 2005 10:17 pm
Location: Mooroolbark Vic

Post by Jaffa »

GRPABT1 wrote:I seriously think anyone who can manage to fit these tyres on a zook properly will not need to be asking questions on here.
x2

Profile says he is an automotive engineer............something doesn't add up?
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".

Post by St Jimmy »

Might be a narc sent to find out where we live. So they can defect us :D
slugs are just snails that sold their belongings for drug money

Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Posts: 14
Joined: Sun Oct 14, 2007 8:00 am
Location: gold coast australia

Post by kurtzook »

i use to build race cars have you heard of jic australias fastest road driven 32 gtst skyline i use to build stuff like that but they took my licence off me so i wanted to get into 4wding after going out with a mate if u want to post something to pay me out please find somewhere else and some one else to do it to all i wanted was some ideas and help
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".

Post by St Jimmy »

kurtzook wrote:i use to build race cars have you heard of jic australias fastest road driven 32 gtst skyline i use to build stuff like that but they took my licence off me so i wanted to get into 4wding after going out with a mate if u want to post something to pay me out please find somewhere else and some one else to do it to all i wanted was some ideas and help
It was the way you framed your question no offence was meant, BONER.
slugs are just snails that sold their belongings for drug money

Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Posts: 14
Joined: Sun Oct 14, 2007 8:00 am
Location: gold coast australia

Post by kurtzook »

thats k mate i know what im doing to most of the project its mostly the transfer case that im stuck with
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".

Post by St Jimmy »

kurtzook wrote:thats k mate i know what im doing to most of the project its mostly the transfer case that im stuck with
Try zuwharrie ,com they put all sorts of things in zooks in the states. Let us know how you go. boner
slugs are just snails that sold their belongings for drug money

Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

I wasn't insulting you either. My point was you may be in over your head, engineer or not. Like it has been said perhaps seliing the (highly sought after) LWB zook and getting a hilux would be better. 37X14.5 on a zook will require work that will make it resemble nothing like the car it one was anyway. Have a look at some of the zooks in tuff truck running similar sized or bigger tyres and gauge the work involved, In the end you will be pretty much building the car from ground up.

Oh and BTW JIC skyline is niiiiiiiiiiiiiiiice.
Posts: 572
Joined: Thu Mar 31, 2005 10:17 pm
Location: Mooroolbark Vic

Post by Jaffa »

kurtzook wrote:i use to build race cars have you heard of jic australias fastest road driven 32 gtst skyline i use to build stuff like that but they took my licence off me so i wanted to get into 4wding after going out with a mate if u want to post something to pay me out please find somewhere else and some one else to do it to all i wanted was some ideas and help
Sorry mate, didn't mean to come across like that. I love skylines, sounds interesting have you got a link to some details on it, I googled it but came up with nothing and Jic magics site doesn't mention anything about Australia at all.

GwagenSteve might be able to give you some suggestions on how to fit 37's
Posts: 14
Joined: Sun Oct 14, 2007 8:00 am
Location: gold coast australia

Post by kurtzook »

jaffa

ill post some pics of the cars i build there equivelent to the style jic builds i used to own the company called dizturbed racing before they took my license i still have the name and do cash jobs but cant do it on books no more how do i find gwagensteve???


im keen for a ground up project ive got the room and the tools just know the basics bout 4wd though

thanks for the help
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

kurtzook wrote: how do i find gwagensteve???
Short answer... You could send him a PM
BUT.... I'm sure he'll post in this thread when he see's it. :cool:
Posts: 572
Joined: Thu Mar 31, 2005 10:17 pm
Location: Mooroolbark Vic

Post by Jaffa »

kurtzook wrote:........ how do i find gwagensteve???
He will probly poke his head in here soon enough


EDIT: Too slow :roll:
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

kurtzook wrote: im keen for a ground up project ive got the room and the tools just know the basics bout 4wd though
If I were you, I'd go and look at the vehicles that placed 1st, 2nd & 3rd last year in the comps you want to enter.
That will give you a good idea of what works and how much fabrication/money/time is needed to prepare a winning car.
Posts: 14
Joined: Sun Oct 14, 2007 8:00 am
Location: gold coast australia

Post by kurtzook »

cheers boys :)
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

if you plan anything with real power you'll end up throwing the chassis away any ways, they're simply not design to handle anything that much. Or you'll spend more time reinforcing it then what it would take to build a new chassis from scratch.

There certainly is some very tuff sierras getting around, have a look here

http://www.outerlimits4x4.com/phpBB2/vi ... &start=120

and these are the small tyres

What ever happen to Big Zook? did it sell?
;)
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

redzook, Markil, ZOOK60 have all put 37s on their zooks. From memory, Redzooks was daily driven.

The short version on how to do it is allow plenty of wheel base (100in) and guard chopping. At least go lux diffs with longs but I would probably go 60 series cruiser diffs if it were me. Use lux rear leafs all round and you will need to sort out some power steering too. A brake upgrade should be mandatory if you're going to be running large tyres and a powerful motor too.

You could also link and coil it but thats another thread entirely.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

unfortunately you live in QLD so it doesn't really matter as you can not make any of those mods legal on the street
Ransom note = demand + collage
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

v840 wrote:redzook, Markil, ZOOK60 have all put 37s on their zooks. From memory, Redzooks was daily driven.
Exactly what I was going to mention..

Redzooks
Image

Chopzuki even ran 44" TSLs on a tintop, his was coiled & linked though. There was a buildup of the same car, now sold, on another forum getting a 1UZ v8 dropped into it, I think i remember reading somewhere it weighed not too much more (if not less!) than the zook engine!
Image

Also rocbox is running 36" iroks on his tintop and i think simcoz is running the same on his soft top (or maybe they are a bit bigger cant remember)...


of course any vehicle of this calibur will need to be trailered around, you wouldnt be able to go driving it on the street.

search for similar buildups both on here and US forums, you can see how much work is involved in such a project, then if you still really want to do it, DO IT!
(but you will have to post a build up in members!) :armsup:
Posts: 1391
Joined: Fri Aug 13, 2004 9:42 pm
Location: Newy

VF

Post by Pyrotech »

PM redzook,

his was a daily driver, with 37s lux diffs and sierra everything else

he now has all the same running gear in is buggy,
Tim, would be the one to tlak to when it comes to zook stuff like that

-Pyro
Zooks are for people that aren't afraid of angles and who have nothing to compensate for

[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

I'm running 36" tyres on my car (ZOOK60's old car). The 36" tyres do rub a little on the front. I had the same tyres on my old red car with only a 2" body lift and shackles, this did have LOTS of cutting.

A 14" wide tyre is going to be very hard to cover. You'll need additional diff width (or very offset rims) so your tyre is going to be out there.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 319
Joined: Thu Jan 04, 2007 5:21 pm
Location: Canberra

Post by Toecutta »

Like to see some pics when you are done :D
LWB Vit, Trail Slayer
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest