Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Turbos
Moderators: toaddog, Elmo, DUDELUX
Turbos
Can you turbo an old engine?
I have 275,000 on the clock and the engine is running perfectly.
Will I need a rebuild for a turbo or what, I can get a cheap turbo for the 2L but I dont think the engine will cope?
I have 275,000 on the clock and the engine is running perfectly.
Will I need a rebuild for a turbo or what, I can get a cheap turbo for the 2L but I dont think the engine will cope?
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
What price you looking at Ruff?
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Im happy to talk deals too NICK :wink:
What do think about the topic at hand though?
What do think about the topic at hand though?
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
tuned sensibly?
Explain more, I am going to talk to some diesel mechs about it, but I want as much info before I talk to them so I know whats going on.
Explain more, I am going to talk to some diesel mechs about it, but I want as much info before I talk to them so I know whats going on.
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
bj on roids wrote:ive seen one go on at 480000 and ive put one on at 240000
and run 17psi all day
youve asked all this before....im sure of it!!
On Gutsquishers I did.
Im just asking it to get some info stored on the board for future reference and stuff.
No biggy.
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
ToNkA wrote:tuned sensibly?
Explain more, I am going to talk to some diesel mechs about it, but I want as much info before I talk to them so I know whats going on.
Have the injectors removed and the break-off pressures and spray patterns checked, the pressures can be upped at this point if required. A pyrometer is a good addition to make when adding an aftermarket turbo so if you are going to run fairly high boost and fuel settings you can keep an eye on the exhaust gas temps. Check your radiator for internal flow and make sure the external cooling fins are clean and free from bugs, grass and Toolangi mud. A large free flow exhaust (3") is good for performance and keeping EGTs down. You can get away without a muffler on most turbo diesels as the turbo effectively blocks a large amount of noise. The less back pressure on a turbo motor the better they run. Just bolting on a turbo will not get the best out of the motor in the short term or the long term. If you try and treat it as a complete package you will get a much better result. Just a few things to think about. :wink:
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
hey there, new here
I bolted a turbo on my 2h Troopy last year with 350 000 on the clock.
It transformed the vehicle but did accelerate bottom end wear.
..so when i blew the head a few months ago a reco motor was the way to go.
I run on 9psi. I have had it up to 12 psi and the difference is huge but geez it sucks the fuel.
chopper
I bolted a turbo on my 2h Troopy last year with 350 000 on the clock.
It transformed the vehicle but did accelerate bottom end wear.
..so when i blew the head a few months ago a reco motor was the way to go.
I run on 9psi. I have had it up to 12 psi and the difference is huge but geez it sucks the fuel.
chopper
88 TD Troopy, locked, lifted and plugged.
97 TDi Jeep Cherokee, (almost) bog standard
97 TDi Jeep Cherokee, (almost) bog standard
Does anyone know anything about the turbos at www.motorshed.com.au in the parts 4 sale section, $295 sounds cheap for a turbo, or $395 4 a supercharger even better
would u b able 2 bolt this onto a hilux 2.8d easily, and then buy a suitable exhaust system? or would there b heaps of stuffing round with fitting it
thanks
Wassa
would u b able 2 bolt this onto a hilux 2.8d easily, and then buy a suitable exhaust system? or would there b heaps of stuffing round with fitting it
thanks
Wassa
Ok, now a question about turbos........
What to look for when buying one?
How do you know is its good or not?
Working or not?
How a trubo work if not a bearig type, or vice versa.
INfo please..
What to look for when buying one?
How do you know is its good or not?
Working or not?
How a trubo work if not a bearig type, or vice versa.
INfo please..
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Who is online
Users browsing this forum: No registered users and 5 guests