Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ shakes.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 9
Joined: Wed Nov 22, 2006 8:11 am

GQ shakes.

Post by patrol84 »

Hi guys, I had a look through some old threads and noticed alot of people having shaking issues at different speeds etc.

My GQ has started shaking while turning left only at certain angles. It drives straight fine.

Any ideas? Or is it a simple wheel alignment issue?
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

is ur car clean, even a small amount of mud on ur rims can do that
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Posts: 9
Joined: Wed Nov 22, 2006 8:11 am

Post by patrol84 »

Yer mate the car is clean.
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

Kin Pin Bearings, Thats what mine is anyway.

Speaking of that i need to fix them.

Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Posts: 184
Joined: Tue May 27, 2003 7:33 pm
Location: Endeavour Hills, Melb, Aust

Post by Red_MAv »

Are they the same thing I know as swivel hub bearings?
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Post by Simo63 »

Red_MAv wrote:Are they the same thing I know as swivel hub bearings?
Sure are
TD 80 Series, F&R Lockers, Winch etc
Posts: 9
Joined: Wed Nov 22, 2006 8:11 am

Post by patrol84 »

Ok, took car for a drive and with window down can slightly here a grinding sound. When driving next to wall sound echoes and here it a lot louder.

I assume this is the wheel bearings. But would they be causing the shaking problem?
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

yeah it can be your wheel bearings, my mk had real bad shakes and it was the lhs bearing.
Tightend it up and it is pretty good,
Know just have to do the king pin bearings,and i should all be fixed.
just gotta get off my ass
AJS
Posts: 79
Joined: Sun Mar 20, 2005 10:51 am
Location: Exmouth WA

Post by AJS »

Mate, as a matter of urgency, jack up your front left wheel and see if the bearings are loose. You can do this by by grabbing the wheel at the top and the bottom and giving it a good shake to see if there is any play.

The GQ is notorious for having the front left wheel come loose because the wheel rotates in the 'undo' direction of the locknuts that hold the bearings in. If the bearings are loose, get them tightened quickly or you risk the wheel coming off whilst driving.
Posts: 9
Joined: Wed Nov 22, 2006 8:11 am

Post by patrol84 »

Jacked wheels up last night and there was slight movement in the wheel. Spinning tyre freely in air could easily here grinding noise from the bearing. Will get them replaced ASAP.
Posts: 9
Joined: Wed Nov 22, 2006 8:11 am

Post by patrol84 »

Wheel bearings changed....grinding noise gone. Shaking still there. Had wheel alignment done and shaking still there. Replacing the Steering Dampener tonight and hopefully will fix the shaking bit.
Posts: 9
Joined: Wed Nov 22, 2006 8:11 am

Post by patrol84 »

Update - Steering dampener been changed now also. Noticed pwr steering fluid was fairly low so I have toped that up.

Still get MASSIVE wheel shaking like my wheels are about to fly off. Any more ideas on what it might be?
Posts: 199
Joined: Mon Jan 05, 2004 11:18 am
Location: Snowy Mountains

Post by Butt Craic »

Panhard bushes?
I'm not very good looking, so I guess I better be useful . . .
Posts: 9
Joined: Wed Nov 22, 2006 8:11 am

Post by patrol84 »

Ok also forgot to mention when having bearings done the guy there said that possibly need to look at getting front auto hubs changed as starting to get little bit noisy when spinning them backwards. This wouldn't be affecting it in 2WD would it?
Posts: 9
Joined: Wed Nov 22, 2006 8:11 am

Post by patrol84 »

Butt Craic wrote:Panhard bushes?
Would that cause mega shaking? Easy to change?
Posts: 199
Joined: Mon Jan 05, 2004 11:18 am
Location: Snowy Mountains

Post by Butt Craic »

I never had it happen really bad on my GU but the panhard bushes, tie rod ends and wheel alignment are common culprits of those symptoms on jeeps.

Not sure on price, someone else might chime in but I'd be surprised if they were more than $30-$50 and they just need to be pressed in.

You can normally check for excessive play by getting someone to reef the wheel left to right while the vehicle is stationary.
I'm not very good looking, so I guess I better be useful . . .
Posts: 9
Joined: Wed Nov 22, 2006 8:11 am

Post by patrol84 »

Just got some Nolathane ones and will put in tomorrow morning. Hopefully this will fix it otherwise its then trying the tie rod ends.
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

buy a land rover :D
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

what size and brand tyres are you running??
My bitch has boost, Nutter Engineering Turbo GQ
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

did you check your king pins? as noted up the top.

Check bear preload on them. Take the wheel off and take the tie rod end off and if the hub falls under it's own weight, theres is not enough preload on the king pins.

If this is so undo the top and bottom plate 4 bolts and take a shim out, What you do the top you should do to the bottom.

This may help.
Posts: 6
Joined: Fri Dec 28, 2007 6:10 pm
Location: Seaford

Post by patrolgrant »

Ok changed the Panhard Bushes today and problem appears to be gone. The old ones had slight cracks in them.

Thanks everyone for your help.
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests