hey guys thinking about sas'ing my pathy useing GQ f&r diffs
is is posible to bolt a gq transfer to pathy box? or to make the output on the drivers side at the front??
also will be looking to use GQ arms,coil and shocky mounts etc in the front and useing the standard pathy mounts of the pathy housing on to a gq housing in the rear..
haveing a few issues finding out much info on it atm.
can any one help me a bit?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
sas pathy?
Use a MQ front diff and get it rotated. The GQ is too wide. Use the GQ radius arms and spring/shock towers and bases. Front springs in mine are from a bundy. Your panhard will have to be fabbed.
I hope to get rid of my diff (putting a stock one in (not rotated with a divorced transfer case)) later this year.
a couple of pics for you.
I hope to get rid of my diff (putting a stock one in (not rotated with a divorced transfer case)) later this year.
a couple of pics for you.
GU3 Patrol Wagon.
Who is online
Users browsing this forum: No registered users and 2 guests