Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

6.5 diesel to GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 30
Joined: Thu Sep 22, 2005 4:32 pm

6.5 diesel to GQ

Post by sad001 »

Righto boys and girls, am seriously looking at N/A 6.5 chev diesel for my dual fual GQ and am looking for first hand experience, pros and cons and mileage etc. Will be getting Brunswick to do it and they do radiator clutch and HS diffs etc.
Cheers
scott
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: 6.5 diesel to GQ

Post by bogged »

Went for a run in one when I was looking to do the conversion, this bloke was Brunswick 'agent' in Melbourne.

Stunning to drive, very torquey, nice sound, good fitment, I was pretty much sold, and had a price in my mind as to what I expected it to be worth. But quote came in at $23k, probably 8k more than I had expected.

I was thinking of fitting to a GU 2.8 (cheap as chips these days) instead of the GQ.. That price was drive in drive out engineered with fully reconditioned motor from Brunswick - thats using a GQ 4.2 Auto..

What motor and box is yours now? It makes a BIG difference in price too.

He wasnt keen to fit it to an 'older' box, due to power issues, the GQ Auto needed to be modded by Rodney at Wholesale autos too.

Ended up too rich for this black duck.
Posts: 30
Joined: Thu Sep 22, 2005 4:32 pm

Post by sad001 »

thanks for the reply, current motor is EFI4.2 and manual box. Did you drive the turbo or NA and was it a GQ? Was it noisey?
Brunswick are about 90mins down the road for me so i'll to make time to pop down for a squizzy.
Cheers
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

sad001 wrote:thanks for the reply, current motor is EFI4.2 and manual box. Did you drive the turbo or NA and was it a GQ? Was it noisey?
Brunswick are about 90mins down the road for me so i'll to make time to pop down for a squizzy.
Cheers
You cant fit the turbo motor in without issues, and you dont need it.
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

take one for a drive and see for yourself

they're a great engine but i would go for a turbo model over N/A if funds permit

bucket loads of torque great for offroad crawling and towing

cons are the price of the conversion
and lack of rev range if you want to get some wheel spin action going
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Hoonz wrote:they're a great engine but i would go for a turbo model over N/A if funds permit
I was told the turbo model wouldnt fit in a GQ/GU... ?
Be interested to see what others find out
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

they fit ... one of the townsville crew is a installer for brunswick
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 50
Joined: Sat Oct 27, 2007 10:02 pm
Location: Perth WA

Post by wolfengo »

Mate my dads best mate has a brunswick chev diesel in his troope and its turbo goes lyk a shower of shit he pulls a 3 tonne boat at 110kms in 5th no probs. My mate has one done in a GQ patrol and its turbo charged it farkin goes and its the same goes really good.

Get it done it may cost a lot but u will reap the rewards seriously lol.

Its good for towing, 4wd and everythin else. But get it on gas and its cheap to run and u hve more power as well.

Cheers Az :armsup:
84 Rangie 2" lift 31" desert duelers LOUD V8
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

Matt from kowari

get it done professionally .. then you get the warrenty and after sales stuff to go with it
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

I'm quite happy with mine. Its a 6.5 turbo in a GQ. lots of toque and power to boot. I was running 3.5 diff gears and that was great, until recently :cry: , these gears where very suited to this motor as they don't rev very high. 4.6's would be great of road but on the hi way it would be revving its tits off.
I could drive at 60 km/h in 5th no worry's, (5 speed std box).
also set up a 100 series, 6.5 turbo, And it goes great!
Living the dream on the hill that floods
Posts: 30
Joined: Thu Sep 22, 2005 4:32 pm

Post by sad001 »

Thanks, what sort of mileage are you getting with the 3.5's and what size tyres? Any over heating issues and I assume you have a body lift for the turbo??
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

Body lift hindered my turbo installation. I have a 2"body lift and the turbo exhaust manifold hit on the inner guard shocker tower, so I cut it out and lowered the shocker tower on the LHS.
The fuel economy I get is about 17l/100km, (My driving style!) running 285's
The cruiser gets down to 13 to 14L/100km. on 265's ( 3.7 diffs)
I was told that I would have over heating trouble! 2 years on and I'm still waiting for this to happen. I run a alloy 2 core radiator from a GMC.
A lot of my parts came from Ebay US, cheep as.
there are a few places that sell motors and other parts, Power on Diesel in Esk QLD are a good soures, as is Brunswick WA. and Linquip QLD.
Living the dream on the hill that floods
Posts: 28
Joined: Fri Aug 27, 2004 11:29 am
Location: Sydney

Post by Nigel »

Hi to the group

Will a 6.5 litre turbo fit into a GQ with out a body lift?
I have a 6 inch suspension lift.

Regards
Nigel
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Nigel wrote:Hi to the group

Will a 6.5 litre turbo fit into a GQ with out a body lift?
did you read the first line of the post above yours?
Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests