Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

200rwkw td42

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 29
Joined: Sun May 22, 2005 11:06 am
Location: vic

Post by cuthill »

why stay with a td42
torque!! and all 1000nm of it
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

cuthill wrote:
why stay with a td42
torque!! and all 1000nm of it
unfortunately speed events aren't all about torque ... crawling is tho
i'd prefer a pretty hot 4.2 for events ... for reliability issues
then again depends on the event

can't beat that sound of a 4.2 turbo with lotsa boost with no muffs
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Post by weeman »

Everyone is entitled to there opinions and what they like however i like my diesel and not just any diesel i really like the 4.2 its simple and has plenty of potential.

And yes you buy cheap chevs and make the same power probably with less but is it really once you start doing conversion and then these adapters may break or fail... anyway im not here discussing 4.2 or other motors...

However i did upgrade my gu td6.... all i need to do now is the pump and i should get around 200rwkw pending on the boost.

At the moment its 15psi dyno figures i dont know hasnt been put on it will in the next few weeks....

However to give you a run down.
- garrett roller turbo (custom spec not off the shelf)
- PWR 600 x 300 x 75 intercooler
- Aluminum intercooler pipe work
- Aluminum airbox has an F350 filter in it out of the V8 Diesels
- Stainless Steel snorkle recessed in the guard.
- Stainless steel dump pipe
- 4" pipe work from turbo inlet to airbox then 4" outlet of airbox to the snorkel.
- extractor manifold HPC coated
- OIL catch can
- Stainless steel oil drain feed and custom made high pressure lines...



I think thats about it...... here are few pics

All work was done by anthony from Tomhawkracefab in narrewarren. He's excellent welder yet he's a diesel mechanic (Ex Cummins R &D)

http://tomahawkracefab.com.au/
Contact Details:. Ph: +61 03 8790 3262.
email: sales@tomahawkracefab.com.au.
Location:. TOMAHAWK RACEFAB. Factory 9 , 3-4 Len Thomas place Narre Warren 3805

Alot of the work was done different to what i expected due to his knowledge and so far so good. Just need to get the pump done to get the power. However big difference from the factory setup my pyro now doesn't get over 400c where i was going over 550 very easily.


AIR BOX
Image
Image


Snorkle
Image
Image

Dump Pipe & oil drain feed
Image

Catch can & manifold intake
Image

Intercooler & pipe work
Image
Image
Last edited by weeman on Tue Feb 12, 2008 1:18 pm, edited 1 time in total.
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

weeman have you had that thing balanced?
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Post by weeman »

Hoonz wrote:weeman have you had that thing balanced?
Nope standard motor wont need to be balanced have seen motors with over 25 psi last over 150k so no need really....
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Posts: 29
Joined: Sun May 22, 2005 11:06 am
Location: vic

Post by cuthill »

with 25 psi my motor still revs to 6500 rpm. motor still going after 4 years and dosen't burn a drop of oil
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Post by weeman »

cuthill wrote:with 25 psi my motor still revs to 6500 rpm. motor still going after 4 years and dosen't burn a drop of oil
Hey Al how u going mate..

and your motor what i was making reference too........ and many others...
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Posts: 29
Joined: Sun May 22, 2005 11:06 am
Location: vic

Post by cuthill »

g'day weeman i thought you were refering to my car. your car is looking good.
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

cuthill wrote:it costs a customer 14000 inc labour to drive in a standard td42 and drive out with 200rwkw with no internal motor work( all bolt on). i know of a couple of these engines still going with no problems at all after 2 years.now pgs says it going to cost( him) 25000 to build a preformance engine. the diferrence is 11000 plus labour. when your std motor lets go you pull off all your bolt on bits and bolt them to another motor.a std engine cost 3500 secondhand. that means you can go through 3 engines before your up to the price of a modded engine. now a modded engine doesn't last forever definetly not as long as 3 stds. just my opinion as the td42 is one of the most bullet proof motors i have seen.
Andy (dzltec) posted in agreement with me in regards to the costs and also stated he has seen the little ends break on TD42's

It costs 7k to build a stock TD42, add porting, balancing HPC, some cryo, big clutch. No std clutch will hold 200 rwkw, where do the bolt ons stop?

There are a lot of people who have cost themselves thousands to save hundreds, It pains me to see that happen, I'd rather inform the customer of the likely outcomes and risk losing the job than say I can do something to only have his 300k engine fail, then have to pull off everything thats been done build the engine and put it together again. Do it once do it safe.

I have a dissasembled 400K GQ TD42, it needs a build. Balancing is not that dear and the factory rods are as far out as 20 grams. If you want to bolt all the extras onto a GU factory TD42 go for it, they have bigger rods and piston pins and will probably handle it. There is always a cheaper option but I like to do things once where possible, a comp truck that sees full throttle for 10 seconds at a time will last longer than someone towing a 3 ton bobcat back and forward to Sydney that may be at full throttle for 5 minutes up a big hill.

Yes I'll bolt on all the go fast bits to an old motor and tune it with the correct EGTs but if I didn't build the engine I can't warrant it, I dont' make decisions for my customers, I just try to offer them the alternatives, pros and cons and leave the decision to the customer.
A standard GQ TD42 may be 3500 but a GU factory turbo motor sure ain't, expect 7-8000 for a used one.

The GQ and GU factory turbo engines are very different internally, you will get away with a lot more with a GU factory turbo than a non turbo GQ TD42

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

cuthill wrote:with 25 psi my motor still revs to 6500 rpm. motor still going after 4 years and dosen't burn a drop of oil
wow thats pretty impressive for a 4.2 diesel
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Loving this thread, weeman your setup looks awesome!
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

Hi all just it the process of building up a 4.2,
spec's so far are ported head with back cut valves, heavier springs
Ivan Tighe reground cam
reco pump with 12mm head and rotor, other mod's
sufari turbo , high flowed with ball bearing center
getting balanced at the moment.
nearly ready to reassembly and wanting to know,
what cooling system up grades are there?
and what clutch should I be using, cheers Phill.
any other suggestions?
Living the dream on the hill that floods
Posts: 309
Joined: Wed Nov 08, 2006 7:11 am
Location: newcastle

Post by hammey »

hey patrol man, i'm just wondering how much you paid for the pump as im up to that stage and looking around.

cheers smitty
innovation is better, better is faster, and fast is all that counts
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Post by weeman »

hammey wrote:hey patrol man, i'm just wondering how much you paid for the pump as im up to that stage and looking around.

cheers smitty
Id be interested to know as well
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

retail on the pump work is around $2700. QFI did mine for a good price.
Living the dream on the hill that floods
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

patrol man wrote:Hi all just it the process of building up a 4.2,
spec's so far are ported head with back cut valves, heavier springs
Ivan Tighe reground cam
reco pump with 12mm head and rotor, other mod's
sufari turbo , high flowed with ball bearing center
getting balanced at the moment.
nearly ready to reassembly and wanting to know,
what cooling system up grades are there?
and what clutch should I be using, cheers Phill.
any other suggestions?
is this to replace the Chev?
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

No, The chev still goes hard, this is my next project, (the misses car), ideally I would like to put the chev in the GU and run the TD42 in the old GQ
Still looking for ideas on the cooling system and a good clutch,
The motor I am Building is a GU TD 4.2t so its good to here the internals are stronger, kind of justifies the cost as I'm nearly at 8k in parts and still haven't started to put it together,
Cheers Phill.
Living the dream on the hill that floods
Posts: 142
Joined: Sat Jun 04, 2005 1:29 pm
Location: Townsville

Post by Newhouse »

Ive got a td42 which goes pretty hard. Last time I dyno'ed it I got 152rwkw. All ive done so far is- High flowed the turbo, (which is a denco high mount), match port both manifolds, upgraded fuel pump also by denco, a big front mount intercooler and a cam grind. I fully rebuilt the engine before hand, didnt balance it because my machine guy recons that the nissan stuff is pretty goon. I havent advanced the modded pump, its running standard and Im running around 25pound boost. The only thing I dont like is the amount of smoke it blows. Its crazy :armsup: Id like to know how people can build crazy diesels and blow bugger all smoke. I was watching last years outback and Kym Boltons wasnet blowing bugger all smoke and it goes hard. Id love to sit down with his engine builder and chat for a while. Future plans for mine would be better injectors, advance the pump abit and maybe a plenumn. That should be good for near 200 I think. In the long run its all down to $$$$$. :twisted:
97 4x4 hilux
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Newhouse wrote:Ive got a td42 which goes pretty hard. Last time I dyno'ed it I got 152rwkw. All ive done so far is- High flowed the turbo, (which is a denco high mount), match port both manifolds, upgraded fuel pump also by denco, a big front mount intercooler and a cam grind. I fully rebuilt the engine before hand, didnt balance it because my machine guy recons that the nissan stuff is pretty goon. I havent advanced the modded pump, its running standard and Im running around 25pound boost
I would have expected lots more neddies with 25psi boost, IC, and high flowed..
The only thing I dont like is the amount of smoke it blows. Its crazy :armsup: Id like to know how people can build crazy diesels and blow bugger all smoke. I was watching last years outback and Kym Boltons wasnet blowing bugger all smoke and it goes hard.
Bad injectors, pump, fuel, pump timing out and over fuelling... ???
Posts: 142
Joined: Sat Jun 04, 2005 1:29 pm
Location: Townsville

Post by Newhouse »

So 205 hp isnt much needles with standard pump setting and fuel?? As i said I havent advanced the pump or fuel?? Fuel is a funny thing because you can give more fuel and you loose horsepower, its very touchy. i will agree with the injectors, they need doing. Its all experemental work at the moment as pretty much no one does high performance work in darwin, with diesels. Ill get 200rwkw+, just give me time.
97 4x4 hilux
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Newhouse wrote:So 205 hp isnt much needles with standard pump setting and fuel??
upgraded fuel pump also by denco
too many UDL's... I read this as upped fuel... so you havent upped the fuel, but it goes 25psi without issues and fawkt injectors??
Posts: 142
Joined: Sat Jun 04, 2005 1:29 pm
Location: Townsville

Post by Newhouse »

Sorry Bogged the fuel has been slightly tweaked. I didnt mean that the injesctors are cactus, but for more power they would need to be upgraded. But 25 psi no worries.
97 4x4 hilux
Posts: 527
Joined: Fri Apr 23, 2004 5:43 am
Location: Auckland, NZ

Post by GQ TROL »

Newhouse wrote:Ive got a td42 which goes pretty hard. Last time I dyno'ed it I got 152rwkw. All ive done so far is- High flowed the turbo, (which is a denco high mount), match port both manifolds, upgraded fuel pump also by denco, a big front mount intercooler and a cam grind. I fully rebuilt the engine before hand, didnt balance it because my machine guy recons that the nissan stuff is pretty goon. I havent advanced the modded pump, its running standard and Im running around 25pound boost. The only thing I dont like is the amount of smoke it blows. Its crazy :armsup: Id like to know how people can build crazy diesels and blow bugger all smoke. I was watching last years outback and Kym Boltons wasnet blowing bugger all smoke and it goes hard. Id love to sit down with his engine builder and chat for a while. Future plans for mine would be better injectors, advance the pump abit and maybe a plenumn. That should be good for near 200 I think. In the long run its all down to $$$$$. :twisted:
The problem with the factory pump that has had the fuel wound up, is it ends up over-fueling down low but it still can't deliver enough fuel up top to make full use of the turbo upgrade.

You've got to go to the 12mm plunger, fit a decent aneroid and bump up the breaking pressure of the injectors a tad. Use the biggest air-cleaner you can find that will fit under the bonnet.

Kym's engine was built by SEQ4x4. Rumoured to be in excess of $20k and I think its been rebuilt a couple of times.
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

if youve seen kyms engine bay and what money he throws at it youll know why it doesnt blow too much smoke. he has every mod people are talking about here... and a custom GT35 turbo to go with it.

he now has auto and recons its the best the cars ever been, but wait till people report back on extreme winch this weekend
turbos are nice but i'd rather be blown
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

unfortunately kyms motor was TOO good and damaged something in the auto on the fri night stages. DNS the rest of the weekend.

never got to check his truck out up close....but its very nice indeed.

PAUL
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

chunderlicious wrote:if youve seen kyms engine bay and what money he throws at it youll know why it doesnt blow too much smoke. he has every mod people are talking about here... and a custom GT35 turbo to go with it.

he now has auto and recons its the best the cars ever been, but wait till people report back on extreme winch this weekend
helps when your a diamond broker or something like that...
Posts: 142
Joined: Sat Jun 04, 2005 1:29 pm
Location: Townsville

Post by Newhouse »

Anyone got a photo of Kyms engine bay?? Has anyone had much experience with ceramic coating? Does it give you much more power?
97 4x4 hilux
Posts: 23
Joined: Sat Oct 27, 2007 3:30 pm
Location: narre warren

Post by tomahawkracefab »

Newhouse wrote:Anyone got a photo of Kyms engine bay?? Has anyone had much experience with ceramic coating? Does it give you much more power?
I might need ceramic coating after this!!...money on ceramic coating could be better spent on other performance mods...heat rejection on piston crown..maybe? ( if your combustion chamber is that hot you got problems elsewhere )....manifold,turbo and dump pipe , might stop ya firewall gettin hot...
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne

Post by GUJohnno »

weeman wrote: However i did upgrade my gu td6....

Catch can & manifold intake
Image
Some good work but could do with a bit of a tidy up under there.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Posts: 142
Joined: Sat Jun 04, 2005 1:29 pm
Location: Townsville

Post by Newhouse »

I saw an old post with Heathgu truck on there with 297 od HP out of the TD42, its has a water to air intercooler, and I see Kym has a front mount? What do you guys think is better?
97 4x4 hilux
Post Reply

Who is online

Users browsing this forum: No registered users and 25 guests