Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where to go in melb

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 23
Joined: Fri Dec 30, 2005 3:55 pm
Location: S/E Suburbs Melbourne

Where to go in melb

Post by brett5141 »

Hi All,

Looking at upgrading the suspension in the surf and wondering where you all reccomend in the South East suburbs of melb, I am in Narre Warren but can travel.

I have been qouted $1500 to replace the front torsion bars and new shockers and springs all way round which will also give a 2"lift, anyone know if this is good or not.


Cheers

Brett
1990 Toyota Hilux Surf
2.4 Turbo Diesel
OME Suspension
ARB Steel bullbar
2.5" Exhaust
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

You can simply dial up the factory torsion bars for 2" lift.

Get on to Ironman re coils and shocks.

I run 3" + 200kg rear coils and foam filled shocks from ironman in my 4Runner.
All works pretty well for me.

You should be able to get coils and shocks fitted to rear for about $500.00

Cheers
Top
Posts: 363
Joined: Mon Feb 14, 2005 9:09 pm
Location: melbourne

Post by duck »

try spicers in bays water, i got my stuf through them.
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

Torsion bars are expensive and there is a bit of labour in changing them.

Get in touch with the boys at wombat offroad in ringwood.

http://www.wombatoffroad.com.au/
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests