Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

how to tell the difrence between transfer cases??

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 317
Joined: Thu Jul 19, 2007 11:03 pm
Location: Brisbane

how to tell the difrence between transfer cases??

Post by Danzo »

I bought a transfer case from a wreckers awhile ago, works fine but has a very minor leak from the back, when I had it in my car I could have sworn it was geared slightly lower then my original T/C, Not 100% sure though.
Wanting to get rid of it,
but just want to check if it is out of a ute or an earlier model (1.3 nt or even 84 N/T or something),
It had the hand brake on the back of it when I bought it but I didnt need it and it was bent anyways so I took it off. it has the 4WD switch

oh yeah, forgot to mention, it bolted straight up to my 88 W/T uni's so it might not be a 1LTR T/C, unless 88 used the 1LTR uni's??? Duno

1: Is there a simple way of checking the ratio's, putting it in gear and counting the revolutions? anyone know what the count should be for certin models.

Chears in advance
Dan
I hate going to weddings because all the grandma's used to poke me in the ribs saying you're next, you're next. They've stopped doing it since I started doing it to them at funerals.
Top
Posts: 801
Joined: Fri Sep 23, 2005 12:56 pm
Location: Darwin N.T

Post by MUD-PIGSIERRA »

Yeah the 1Ltr and 1.3 certain models shared the same Uni's 25mm caps I believe they are.
..wrench, wheel, wreck repeat..

check out the action @ http://www.darwin4x4.net
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

What month 88 model is it because I think 88.5 they may have gone to bigger flanges.
Top
Posts: 918
Joined: Sun Aug 20, 2006 11:46 am
Location: Western Brisbane

Post by Highway-Star »

Dont't know if this will help you?

http://www.suzukitech.org.uk/pdf/Transm ... mation.pdf

Its from a link in the Sierra Bible.
Wheeling on completely wicked angles, without even looking stable.
Top
Posts: 317
Joined: Thu Jul 19, 2007 11:03 pm
Location: Brisbane

Post by Danzo »

GRPABT1 wrote:What month 88 model is it because I think 88.5 they may have gone to bigger flanges.
My build date is DEC 87,

I think the bible link might help, When I get a chance to drag it out from the shed!
Thanks again
More info would be apreciated aswell.
I hate going to weddings because all the grandma's used to poke me in the ribs saying you're next, you're next. They've stopped doing it since I started doing it to them at funerals.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 39 guests