square socket drive???

[Fmx_Aus]

Have looked around for a square socket drive set to take the plugs off my gearbox and cant them anywhere.

Where do ya get them from??

Cheers

[dank]

can't you use a shifter? edit: brain F^&k.... what want33s said...

[want33s]

I just use my 3/8 drive ratchet.

[r0ck_m0nkey]

As want33s said, just use a 3/8 drive ratchet. If you don't have one, but have 1/2", just go buy a 1/2" - 3/8" reducer.

[v6hilux]

I don't own one, but I have seen lug-nut spanners. They are round sherical shape with 4 different sizes.

[GRPABT1]

Have looked around for a square socket drive set to take the plugs off my gearbox and cant them anywhere.

Where do ya get them from??

Cheers

Bwahahahahahahahaha! ROFL! sorry am I the only one that finds this funny?

[Fmx_Aus]

Real funny smartarse

Thanks fellers, ended up using my socket rachet.

[MUD-PIGSIERRA]

Have looked around for a square socket drive set to take the plugs off my gearbox and cant them anywhere.

Where do ya get them from??

Cheers

Bwahahahahahahahaha! ROFL! sorry am I the only one that finds this funny?

X 2..... Yeah sorry FMX I was laughing too.....

[GRPABT1]

Real funny smartarse

Thanks fellers, ended up using my socket rachet.

Yeah don't mean to offend mate, I had exactly the same brain fart for a minute or so when I went to change the oil in my gearbox hence why I found it funny.

[PCRman]

I know this thread has pretty much been answered but i thought i would share my solution to this prob.

I went and bought a length of 10mm keyway steel, cut an inch off the end, filed it a little and hammered it into a spare 12mm, 1/2" drive socket.
Now i have a plug tool that fits the plug filler socket much better than my 3/8" drive does and wont lift out of or damage older, tight plugs even when i put my 40cm, 1/2" drive bar on it.

[Fmx_Aus]

Thanks for your post champ.

I dont have a manual, so what transmission oil do ya use??

[Fmx_Aus]

No worries GRPABT1

[want33s]

VMX80 for gearbox and transfer.
http://www.datateck.com.au/lube/castr_a ... Equipment=

[PCRman]

Thanks for your post champ.

I dont have a manual, so what transmission oil do ya use??

It varies a little.

For 1.6L auto Vit some are;

Castrol TQ DIII
Valvoline ATF type D
shell ATF IID or ATF IIIG


Most of the lube companies have Lube guides where you can put your vehicle make-model and it will give you all the recommended oils (but don't trust them too much )

[zooker]

VMX80 for gearbox and transfer.

x2. It's all you need for gearbox, transfer and diffs

[Fmx_Aus]

Thanks fellers, appreciate it.

[Midget]

I have purchased A set of these to suit 10mm and 13mm plugs frommy Snap On Dealer...

Jamie

[ScrawnC]

I have purchased A set of these to suit 10mm and 13mm plugs frommy Snap On Dealer...

Jamie

ouch!! I bet there was a mortgage involved too!!

[Midget]

Na it wasn't as bad as everyone seems to think,From memory it was about 50 bucks or something like that...