Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux diff bearings

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 64
Joined: Mon Jan 15, 2007 6:35 pm
Location: melbourne

hilux diff bearings

Post by virtha21 »

Can anyone tell me if the carrier bearings on a hilux lsd are the same size as an open centre? I just brought back a spool from the states and the bearings from my lsd are about 5mm bigger on the inner ring of the bearing, need to know if pen centre ran smaller carrier bearings?
92 hilux s/c, 33" Mickey T MTZ, 2" susp, 2" shackles, spool rear
Top
Posts: 41
Joined: Thu Dec 02, 2004 2:55 pm
Location: Wollongong

Post by FastEddie »

When I fitted my lockers the front open centre was using a different size carrier bearing than the rear LSD. Same OD but different ID. Can possibly get you the bearing number of the smaller ID bearing if needed.

Eddie
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

FastEddie wrote:When I fitted my lockers the front open centre was using a different size carrier bearing than the rear LSD. Same OD but different ID. Can possibly get you the bearing number of the smaller ID bearing if needed.

Eddie
i'm 99% sure it only depends on age say before 86? they were the smaller ID bearing.
plenty of parts on the bench
Top
Posts: 41
Joined: Thu Dec 02, 2004 2:55 pm
Location: Wollongong

Post by FastEddie »

Mine is a '96 model ln106 that as far as I'm aware had the origional front diff, but I could be wrong.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

FastEddie wrote:Mine is a '96 model ln106 that as far as I'm aware had the origional front diff, but I could be wrong.
Where i ran into it was mates 97 ln106 front diff but he's unsure if the ratios were changed before he owned it. If they are different bearings are only like $15ish a side from a bearing shop.
plenty of parts on the bench
Top
Posts: 446
Joined: Wed Jun 30, 2004 12:14 pm
Location: Perth

Post by bulldogy »

I know the V6 models had larger bearings maybe the spool you got was for a 4cyl? the rear lsd may have been a 4 pinion which i think had larger bearings aswell.

As sic lux said the bearings are available and pretty cheap so dont stree too much mate give them your sizes and they should be able to get you the right bearing.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 81 guests