hey,
Is there any difference between the old small block chev and the LS1 gearbox bolt patterns. I believe the crankshaft bolt pattern and spacing is different though.
I am doing a gen 3 to 80 series auto conversion, and castlemaine do a adapter plate for chev to this auto, i want to know if i can use this plate and make my own crankshaft adapter for the torque convertor.
marks adapter do a kit but at $1275 seems a bit steep.
cheers'
steve
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
LS1 vs SB chev bolt patterns
Moderators: toaddog, TWISTY, V8Patrol, Moderators
LS1 vs SB chev bolt patterns
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
I do not believe you can use a SBC adapter as the LS1 crank protrusion at rear is different. Looked at that myself want to do the exact same conversion. One answer would be to go Auto and run a 4L65E auto saves speed senser issues, no need to put spacer or offset flywheel and the adapter for Auto to transfer is cheaper. Wholesale Automatics in Bayswater Vic sell complete kits.
Zack
Zack
Who is online
Users browsing this forum: No registered users and 2 guests