Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Turbo boost adjustment and lower EGT

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 20
Joined: Wed Jan 16, 2008 7:19 am
Location: Wurruk

Turbo boost adjustment and lower EGT

Post by Rob Jonno »

Wiil adjusting the turbo boost higher on a 2001 hilux, lower the EGT
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Turbo boost adjustment and lower EGT

Post by bogged »

Rob Jonno wrote:Wiil adjusting the turbo boost higher on a 2001 hilux, lower the EGT
no, the opposite. If its close to the turbo limits now.
Last edited by bogged on Mon Mar 10, 2008 7:46 pm, edited 1 time in total.
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Re: Turbo boost adjustment and lower EGT

Post by tweak'e »

Rob Jonno wrote:Wiil adjusting the turbo boost higher on a 2001 hilux, lower the EGT
generally yes for a diesel (assuming diesel as you havn't mentioned motor at all)

there can be a few exceptions to that all depending on what motor you have and how high the boost is.
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Post by me3@neuralfibre.com »

More air to heat up with same fuel = lower EGT

BUT, if the turbo is out of efficiency range, more heat = higher EGT.

Depends on intercooler efficiencty, boost compensator and turbo size.

Probably reduce, but not by much, unless you are buring close to the limit of the avaialble oxygen. If you are close to the limit, then yes, it will be a decent drop in EGT.

EGT's spike just south of stochiometic. Diesels stay below that point. Petrol's above it.

Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Posts: 20
Joined: Wed Jan 16, 2008 7:19 am
Location: Wurruk

Post by Rob Jonno »

Yes it is a turbo diesel 1 KZTE engine. I itended to put a Tee piece in the rubber hose that connects to the waste gate diafram and fit an adjustable valve to vent off the pressure being sent to the waste gate. I want to increase it from 11 to 15 psi. Some more info about my vehicle I've just fitted a 3" mandral bent exhaust from turbo back including the dump pipe and it has eco-shot LPG injection. My goal is to get my EGT down as it will exceed 550 deg C after turbo while driving up hill on the highway under normal conditions. I have had no luck in finding out any information on stadard EGT's for my hilux and I beleive they may run hotter than 550 from the factory, if anyone has info on this subject it would be greatly appreciated.
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

Shift your EGT probe to before the turbo. Otherwise you're just guessing.
More boost will always lower EGT's, even up past 20psi with no intercooler.

However, those engines crack heads at normal power levels. Can you afford to blow it up?
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

lpg injection is the reason you have high egt's.
have it retuned dont mess around with it they dont like boost or high egt's

alot of places tune the lpg to rich to try and match there claims of decent power increases, on a stock motor all lpg can do safely is slightly increase econamy.
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Post by me3@neuralfibre.com »

1KZTE is a safe motor in stock form, but I hear bad stories about the pre-comp chambers if you turn up the wick. Stock EGT is supposed to be very high on these already (720 pre turbo).
I never put a gauge on mine to confirm, but plenty of discussion on aus surf list.
Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Posts: 109
Joined: Wed Mar 14, 2007 4:24 pm
Location: Brisbane, Qld

Post by peeko22 »

i did it to my 1kz and was a waste of time i wound it back to 12 ish 13 again . all it did was wind the turbo there was no real power difference at all .

what you need is a dpchip ($1300) to go with it then you can adjust the fuel and everything too but get a pro to do it cos messin around with egt's can cause serious damage to your engine . i have heard its worth the price though
Email - flossamarosus@hotmail.com
Posts: 20
Joined: Wed Jan 16, 2008 7:19 am
Location: Wurruk

Post by Rob Jonno »

Thanks Peeko, do you know if it had any effect on your egt as I'm not trying for more power I just want to lower my egt.
Posts: 109
Joined: Wed Mar 14, 2007 4:24 pm
Location: Brisbane, Qld

Post by peeko22 »

nah no idea sorry i put an intercooler on mine and that helped with egt's . i guess its up to your budget and how much you wanna customize your car. i would assume your egt s should be a bit lower by uppin the boost a bit cos your not adjusting fuel.i think 15 is a bit high though i havent had any trouble with mine and i run 13
Email - flossamarosus@hotmail.com
Posts: 20
Joined: Wed Jan 16, 2008 7:19 am
Location: Wurruk

Post by Rob Jonno »

OK, I might try turning it up a little. So what intercooler did you fit I've been thinking about a Denco air to water kit.
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

have a look on http://www.toyotasurf.asn.au/forum/

i think darrie runs a ARE water/air intercoller on the 1kz in a surf. it will proberly perform a whole lot better than a generic barrel.
Posts: 109
Joined: Wed Mar 14, 2007 4:24 pm
Location: Brisbane, Qld

Post by peeko22 »

i got a air to air front mount intercooler from ebay ... 600x140x74deep it think. i adjusted the boost a bit to compensate from the loss in piping cos it ran about 9psi after i hooked it all up

all up it definitly made a difference though but not as much as i hoped i notice more torque more than anythin. i am happy with it though.
Email - flossamarosus@hotmail.com
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests