Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Vibration since SPOA

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 6
Joined: Wed Jul 11, 2007 11:43 pm
Location: Coffs harbour

Vibration since SPOA

Post by yldzuk »

i am currently doin a SPOA conversion on my suzi and is almost finished just got do some fine tuning. I thought it was al sweet to take for a test run and i have come across that it has a bad vibration when underload the whole car just vibrates i am currently running 3 inch raised leafes with 6" perches and the zlink steering system also under all this have 33"bfg allterrains and 6* spring wedges just wondering has anyone ever done this conversion with a similar problem and how they fixed the problem any info would be greatly appreciated cheers. YLDZUC
Top
Posts: 75
Joined: Tue Jan 22, 2008 7:54 am
Location: Canberra

Post by Mike_1324 »

I havent raised mine, but could it be because of the different angle now on the propeller sharts, it is working the uni's alot harder?





MF
Top
Posts: 242
Joined: Tue Oct 09, 2007 9:54 pm
Location: Brisbane

Post by ScrawnC »

My guess would be the uj's too!!

You might have to use a cv instead, I think it is the uj off the back of the transfer (to rear diff) thats works hardest?
Have you checked to see if the uj's are out of phase? Did you disassemble/reassemble the drive shafts at all?
Top
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

http://www.outerlimits4x4.com/phpBB2/vi ... hp?t=84825

have a read. almost definatly the problem :cry:
michael
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

pics off tailshaft and diff please , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Re: Vibration since SPOA

Post by GRPABT1 »

yldzuk wrote:i am currently doin a SPOA conversion on my suzi and is almost finished just got do some fine tuning. I thought it was al sweet to take for a test run and i have come across that it has a bad vibration when underload the whole car just vibrates i am currently running 3 inch raised leafes with 6" perches and the zlink steering system also under all this have 33"bfg allterrains and 6* spring wedges just wondering has anyone ever done this conversion with a similar problem and how they fixed the problem any info would be greatly appreciated cheers. YLDZUC
Sounds like a scary steering candidate to me......
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 6
Joined: Wed Jul 11, 2007 11:43 pm
Location: Coffs harbour

Post by yldzuk »

the drive shaft was diassembled during the conversion but it was marked so i can position it the same way again will try to get some pics for you to look at thanx to everyone that has passed on their info it is appreciated alot and if the is anyone else with any other ideas that would be great cheers yldzuk
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

a spoa with 3" raised leafs plus 6" perches are u for real????
buggy time............
Top
Posts: 356
Joined: Thu Apr 03, 2003 2:55 pm
Location: Canberra

Post by zooker »

yldzuk wrote:if the is anyone else with any other ideas that would be great cheers yldzuk
Take out the 3" springs and replace with flatter springs and buy a crossover/high steer setup
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Top
Posts: 6
Joined: Wed Jul 11, 2007 11:43 pm
Location: Coffs harbour

Post by yldzuk »

looked for standard leafs locally and no one had any at reasonable price otherwise i would have gone back to standard the local wrecker wanted $75 a spring which i thought was a bit steep
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Re: Vibration since SPOA

Post by want33s »

yldzuk wrote:i am currently doin a SPOA conversion on my suzi and is almost finished just got do some fine tuning. I thought it was al sweet to take for a test run and i have come across that it has a bad vibration when underload the whole car just vibrates i am currently running 3 inch raised leafes with 6" perches and the zlink steering system also under all this have 33"bfg allterrains and 6* spring wedges just wondering has anyone ever done this conversion with a similar problem and how they fixed the problem any info would be greatly appreciated cheers. YLDZUC
3" raised springs... :shock: 6" perches... :shock: Z-link.... :shock: Have you got your will up to date??
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

im betting its spring wrap too... mine does it in 1st and 2nd if i boot it...
The worst thing about censorship is ███████.
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

zooker wrote:
yldzuk wrote:if the is anyone else with any other ideas that would be great cheers yldzuk
Take out the 3" springs and replace with flatter springs and buy a crossover/high steer setup

WINNER

Then check your uni angles.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 140
Joined: Sat Nov 18, 2006 3:52 pm
Location: on a rock near you

Post by muz_ook »

dude drop it down an inch or SIX........... :shock: .............


it doesnt need to be that tall, and it will/is causing you problems.....


Muz.
[img]http://i122.photobucket.com/albums/o268/muzook/RedX.gif[/img]
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

i want to see photos before you touch it though =) hehe
The worst thing about censorship is ███████.
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

alien wrote:i want to see photos before you touch it though =) hehe
or roll it going out of the driveway.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

www.scarysteering.com
*edit* where'd it go???

You should get some vibration reducing tips on there. The tech is great!

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest