Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
whats the lowest lift to fit 37" tyres
whats the lowest lift to fit 37" tyres
whats the lowest lift needed to fit 37" tyres with guard chopping, but not exessive chopping.
I want to know what people have done not hear say or rumors or he said this or that
cheers
I want to know what people have done not hear say or rumors or he said this or that
cheers
bogged wrote:2 and 2 will work if you cut enough guard out.
What Bogged said.
If it were a ute, can easily do it and of course with no trimming. However, need to space the front diff forward about 20mm to get enough clearance if running 10" rims with little offset. Not too sure, but might be able to get away without having to do this if the 37's are on 8" rims.
Yep, keep them 1" coil spacers handy for Justin Case.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Below is a link to a SWB GQ running 37s with 3 inches of suspension lift and no body lift.
http://www.patrol4x4.com/forum/showthre ... hlight=swb
http://www.patrol4x4.com/forum/showthre ... hlight=swb
4 inch spring, no body lift, no gard chop in the front with only a bit in the rear.
Zook60 fitted 38 Maxxis creepy crawlers to a GQ shorty with only a two inch spring lift just by trimming the guards and extending the rear bump stops 65mm. You will definitely fit 37s with a 2 inch spring lift only.
I'd be willing to bet you could fit them with no lift at all just by spacing your diffs and trimming the guards and extending the rear bump stops.
Zook60 fitted 38 Maxxis creepy crawlers to a GQ shorty with only a two inch spring lift just by trimming the guards and extending the rear bump stops 65mm. You will definitely fit 37s with a 2 inch spring lift only.
I'd be willing to bet you could fit them with no lift at all just by spacing your diffs and trimming the guards and extending the rear bump stops.
What's the difference between ignorance and apathy? I don't know and I don't care.
I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
we have done 38 x 13 swampers on GQ with 3" suspension lift, and 40mm bump stop spacers, to cope with the longer shocks, so more droop, as well as larger tyres.
We do cut a fair amount out of the fenders, and fit rubber flares to do it, but it looks right when its done, and the orginal mud flaps go back on.
We do cut a fair amount out of the fenders, and fit rubber flares to do it, but it looks right when its done, and the orginal mud flaps go back on.
front is real easy!
rear is not so easy...
this is my effort
http://www.perth4x4.net/forum/showthread.php?t=19176
rear is not so easy...
this is my effort
http://www.perth4x4.net/forum/showthread.php?t=19176
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
hehe, bogged, i figured that, but i ment where, front rear top, inside out side, how much that type of thing, i was basicaly thinking when i start doing it to just flex the car up (with a fork lift so i can get it to absolute maximum) and mark where the tyres rub then chop it out???
Go Hard Or GO Home
AFeral wrote:Only an idiot would use a nine inch grinder to chop gaurds. A 5 or 4 inch do the job just fine.
pfffft screw the grinder, to noisy, use the oxy
GU Twin cab TD42T compound turbos
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
lwb sierra ca18det, 37" "CANT HOLD ON"
lwb sierra g16a, daily driver
https://www.suspensionstuff.com.au/shop/
Who is online
Users browsing this forum: No registered users and 30 guests