Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

load springs out and what a difference it makes

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

load springs out and what a difference it makes

Post by short stuff »

i took my load springs out of my suzi this morning and went for a drive the places where i usally need a run up i just crawled through without a hassle no wheel spin at all so yea it does work a treat
Image
Image
Top
Posts: 1391
Joined: Fri Aug 13, 2004 9:42 pm
Location: Newy

cx

Post by Pyrotech »

so what is it that your actually saying? more info
Zooks are for people that aren't afraid of angles and who have nothing to compensate for

[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Top
Posts: 242
Joined: Wed Jul 11, 2007 9:38 am
Location: stuck in a hole. not offroad, just deception bay

Post by mrw82 »

he's saying he took the load leaf out of the springs and is very impressed with the increased performance.

im thinking of doing this to the rear of my LWB zook and fit 2" extended shackles to make up for any sag when loaded up. i have 2" EFS springs and they are very stiff.
Top
User avatar
St Jimmy
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".

Post by St Jimmy »

mrw82 wrote:he's saying he took the load leaf out of the springs and is very impressed with the increased performance.

im thinking of doing this to the rear of my LWB zook and fit 2" extended shackles to make up for any sag when loaded up. i have 2" EFS springs and they are very stiff.
My EFS springs are 2yrs old and are as hard as the day i put them in so let me know how it works out ,Boner
slugs are just snails that sold their belongings for drug money

Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Top
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

Post by short stuff »

ill see how long they go before they start bending
Top
Posts: 200
Joined: Sun Mar 19, 2006 4:29 pm
Location: Launceston

Post by CairnsZook »

I pulled the 2nd leaf from the bottom out of my rears today. I don't think it made much of a difference. Although I didn't try to flex her up or anything, and I haven't touched the front yet. There are still 4 leaves left, maybe I need to remove the bottom one as well.

\/ Pic after removal. \/

Image
Top
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Contact:
Contact get it up there

Post by get it up there »

I've very recently removed the overload springs in the rear, and in the front i removed the 3rd from the top (which was the 2nd from the bottom) At the same time, i also disconnected the spring retainers (think thats what their called). I was very, very happy with the result, got more flex, and a-lot softer. I put a winch on 2 weeks ago, and had to put the leafs back in the front.. sagged it down to much!! :cry:
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Top
Posts: 200
Joined: Sun Mar 19, 2006 4:29 pm
Location: Launceston

Post by CairnsZook »

My rear pack did have 5 leaves (now 4), is the overload spring the very bottom one, with the bolted retainer? I also opened up the other retainer straps.

Here is the front pack as it stands now. I'll do the same to it tomorrow.
Image
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

I run 3 leaves in the front and 4 in the back (I would run 3 in the rear too if I never carried loads) and I find it works well offroad. Body rolls a bitch round corners on road though but I can live with that.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 117
Joined: Thu Mar 23, 2006 4:48 pm
Location: Redbank Plains

Post by error »

Ok, so how do you guys go towing loads with out your loadsprings?
I tend to over load mine a little bit, last time 800kg + 150kg trailer,
not bad for a car rated at 450kg..
Just want to play...........
Top
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Contact:
Contact get it up there

Post by get it up there »

CairnsZook wrote: is the overload spring the very bottom one, with the bolted retainer? I also opened up the other retainer straps.
Yup yup.. thats the one. You have the same set up as what i had.. in your case (someone please correct me if im wrong!!) i would be removing that overload spring, and then once the o/load spring is out, then remove the third from the top. If your planning on getting a winch, only remove the o/load one.. made a big difference to mine :)
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Top
Posts: 200
Joined: Sun Mar 19, 2006 4:29 pm
Location: Launceston

Post by CairnsZook »

OK, the front end is pretty sweet now. I took out the 2nd from the bottom and she rides A LOT smoother! Front flexes reasonably well too (well more than it did anyway).

In the rear end, replaced the 2nd from the bottom, and removed the very bottom leaf. It is not flexing as well as the front, ie. wheel not tucking up under the guard. I will probably remove the 2nd from bottom as well.

Image
Image
Top
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Contact:
Contact get it up there

Post by get it up there »

nice looking zook mate!! Good to hear you've got the front end heaps better!! :) When that pic was taken, the rear wasnt hitting on the bump stops was it??
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Top
Posts: 200
Joined: Sun Mar 19, 2006 4:29 pm
Location: Launceston

Post by CairnsZook »

The front reaches the bump stops, but the rear is still about 40-50mm away.
Top
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Contact:
Contact get it up there

Post by get it up there »

bugga!! Like you said.. remove another one.. then you'll have the same set up as myself, GRPABT1, and plenty others.. and that set up seems to work pretty bloody good!! Your in Launy to are you? Should go out for a play sometime!!
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

having the load leaf in my lux springs raises the zuk about 2" and makes it ride like crap =P with the load leaf out it rides like a zuk again and flexes like mad!
The worst thing about censorship is ███████.
Top
Posts: 38
Joined: Sat Dec 30, 2006 4:03 pm

Post by keatings »

my zook (85 swb) is hard as a rock. should I try taking out the bottom leaf on each set? How hard is it to do.

Sorry for butting in by the way.
Top
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Contact:
Contact get it up there

Post by get it up there »

keatings wrote:my zook (85 swb) is hard as a rock. should I try taking out the bottom leaf on each set? How hard is it to do.

Sorry for butting in by the way.
Depends on if you still have overload springs in there or not.. start with the o/load springs.. then if you still arent happy... do what CairnsZook is about to do :)
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Top
Posts: 38
Joined: Sat Dec 30, 2006 4:03 pm

Post by keatings »

i'll give it a go and let u know. Just to confirm the load spring is the very bottom one yes? Does this have any other ramifications? IE: poor handling on road or saferty concerns. ( kids in car most of time)
Top
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Contact:
Contact get it up there

Post by get it up there »

keatings wrote:i'll give it a go and let u know. Just to confirm the load spring is the very bottom one yes? Does this have any other ramifications? IE: poor handling on road or saferty concerns. ( kids in car most of time)
Yuppers.. the very bottom one, which will be short, and thicker than the others. Have a look at the 2nd pic that CairnsZook put up.. you will see it there. To my believing, (and what i found with mine) it rolls a bit more around corners, softer to ride in, fexs more, but you wont be able to carry as much weight, so it's going to be a try/trial thing i guess. I've never heard of it having any safety concerns.. but im not an expert!! hehe
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Top
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

Post by short stuff »

i have a problem now where i cant take a third person the bump stops hit so another reason not to take three and tell them to get a 4by
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 69 guests