When replacing front seals and bearings in my hj47 i also took apart, cleaned and regreased the hubs (AISIN type).
Turning to hub to "lock" from "free" it will only go halfway, I can hear the little gear getting pushed and with both hubs locked I can't turn the front shaft so it is obviously working.
Any thoughts? I suppose i put it together wrong but can't think how it would result like this.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
freewheeling hub
Moderators: toaddog, Elmo, DUDELUX
freewheeling hub
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
http://www.pirate4x4.com/forum/showthread.php?t=281879
Read about how to line up the pawl with the clutch and spring. If that's not it, it'll be in there somewhere.
Read about how to line up the pawl with the clutch and spring. If that's not it, it'll be in there somewhere.
[b]1985 HJ60[/b]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
[url]http://forum.ih8mud.com/60-series-wagons[/url]
Who is online
Users browsing this forum: No registered users and 5 guests