Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Shackle pin diameter

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 122
Joined: Mon Jul 16, 2007 9:32 pm
Location: Toowoomba

Shackle pin diameter

Post by neil_se »

I've searched everywhere but can't find a definite answer. I'm making some extended shackles to suit Bruce's poly bushes, but not sure what diameter to drill the holes? I think the original pins are 13mm but i'm guessing 1/2" would be easier to but high tensile bolts for? I know there's not much of a difference between 12mm, 1/2" and 13mm but i just want to make the best choice.

cheers
Neil
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Use 1/2" bolts.

1/2" 12.7mm - it's the best fit. 13mm isn't commercially available.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 122
Joined: Mon Jul 16, 2007 9:32 pm
Location: Toowoomba

Post by neil_se »

I knew someone would say that, seeing as i've only got 12 and 13mm drill bits.

Off to the shops i go :roll:
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

neil_se wrote:I knew someone would say that, seeing as i've only got 12 and 13mm drill bits.

Off to the shops i go :roll:
use the 13mm bit.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 377
Joined: Fri Jan 06, 2006 4:03 pm
Location: Perth

Post by VR Rodeo »

nicbeer wrote:
neil_se wrote:I knew someone would say that, seeing as i've only got 12 and 13mm drill bits.

Off to the shops i go :roll:
use the 13mm bit.
Thats what I just did and reused the old pins
'92 Rodeo - VR V6, T700, 31's
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

But if you're going to do that remember to only drill one side of the plate at 10mm and the other 13mm or the shackle will be really sloppy.

I really hate those stock pins. I have a range here in the shed with horrible wear on the 10mm threaded bit

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 122
Joined: Mon Jul 16, 2007 9:32 pm
Location: Toowoomba

Post by neil_se »

Done and done, i love my new drill press :)

For future reference my shackles are 50x8mm plate, 170mm total length, 120mm hole to hole.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest