Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
clutch sound
clutch sound
i have had a noise in my clutch now since i brought the zook but its got louder and im a little worried about it from research i have done it seems that it is either the throwout bearing or the thrust bearing but just seeing if anyone has any ideas on how to fis the problem so ok when i have my clutch in there si no noise but when i let it out there is a chunky bearing sound (sounds like sand has got into a bearing or a buggerd wheel bearing) is there any way i can fix this without getting a new clutch because this clutch is only 16months old cheers
1.3lt 2inch lift 2inch extshakles extractors 2inch strait through exhaust 30x9.50 firestone firehawks sunnys no swaybar upgraded headlights rodeoshock up front with patrol shocks rear
when my foot is off the clutch is when the noise is being made when i push the clutch to the floor its silent and what do u mean by my gearbox is root (just wat i wanna hear)
1.3lt 2inch lift 2inch extshakles extractors 2inch strait through exhaust 30x9.50 firestone firehawks sunnys no swaybar upgraded headlights rodeoshock up front with patrol shocks rear
If it makes the noise without the clutch depressed then the input bearing is faulty.
To replace the input bearing the box has to be stripped so it may as well be fully rebuilt.
Don't stress about it... my Zuki and my Sahara cruiser both do it.
I'll repair/replace if and when it blows up.
Zuki gearboxes are cheap.
To replace the input bearing the box has to be stripped so it may as well be fully rebuilt.
Don't stress about it... my Zuki and my Sahara cruiser both do it.
I'll repair/replace if and when it blows up.
Zuki gearboxes are cheap.
ive just done a full rebuild on my gearbox and i have the same noise when clutch is out (foot of pedal) and i know the bearing is not stuffed as it is brand new.
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Lots of custom gear as I cant afford the proper stuff.
Who is online
Users browsing this forum: No registered users and 4 guests