Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Transferring 1.6L from NT to WT

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 122
Joined: Mon Jul 16, 2007 9:32 pm
Location: Toowoomba

Transferring 1.6L from NT to WT

Post by neil_se »

I'd like my Sierra to be able to do highway speeds. I've spotted a 1.6L MPFI SJ410 for sale that i'd like to pinch the engine from to put in my WT. Its had the conversion done by Suziworx. I've done a bit of reading on conversions into NTs but i'm not sure what problems i'll run into trying to do the reverse to drop it into my car.

I'd like to use my current gearbox so i'll use the adaptor plate.

I guess i'll need to modify my WT engine mount rather than use the one from the NT?

Any way i can get away with not doing a body lift?

Take the fuel pump, fuel lines, wiring and ecu to put in mine?
Top
Posts: 35
Joined: Mon Mar 31, 2008 9:40 pm
Location: Perth

Post by speedracer006 »

whats NT ans WT
Top
Posts: 122
Joined: Mon Jul 16, 2007 9:32 pm
Location: Toowoomba

Post by neil_se »

Narrow Track and Wide Track.
Top
Posts: 35
Joined: Mon Mar 31, 2008 9:40 pm
Location: Perth

Post by speedracer006 »

cheers
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Straight swap. Remove the engine and mounts complete with adaptors and fit straight to WT.
The fuel lines are different so transfer the EFI ones.
Everything is prety much the same.
Top
Posts: 356
Joined: Thu Apr 03, 2003 2:55 pm
Location: Canberra

Post by zooker »

I reckon you'd be better off putting you're WT diffs under the NT. Everything is already done on the NT for the engine and its most probably engineered as well.
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Top
Posts: 122
Joined: Mon Jul 16, 2007 9:32 pm
Location: Toowoomba

Post by neil_se »

The body on it is pretty rusty. It might be sold before i get a chance to have a look at it anyway :x
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

want33s wrote:Straight swap. Remove the engine and mounts complete with adaptors and fit straight to WT.
The fuel lines are different so transfer the EFI ones.
Everything is prety much the same.
It's a 1.0, not a 1.3 NT so I don't think it's a straight swap ;)
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 77
Joined: Tue Jan 22, 2008 6:09 pm
Location: Newcastle

Post by suzukigav »

someone has been looking on ebay
Top
Posts: 122
Joined: Mon Jul 16, 2007 9:32 pm
Location: Toowoomba

Post by neil_se »

Indeed, been considering the conversion the last few times its been listed.
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

cj wrote:
want33s wrote:Straight swap. Remove the engine and mounts complete with adaptors and fit straight to WT.
The fuel lines are different so transfer the EFI ones.
Everything is prety much the same.
It's a 1.0, not a 1.3 NT so I don't think it's a straight swap ;)
OK my mistake, the engine mount adaptors will need to be changed.
There are members here that do kits (BenT I believe) to put a 1.6 into a 1.3 car nt or wt as well as places like lowrangeoffroad.
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Put the WT body and WT axles under the already converted 1.0?

Best of both worlds then - the narrower spring spacing of the 1.0, no engine mount/engine alignment work - pretty much just remover and replace except for the spring pads on the axles.

Just an idea.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 122
Joined: Mon Jul 16, 2007 9:32 pm
Location: Toowoomba

Post by neil_se »

That would be the ideal combination, but i think that's even more work than just swapping the engine, loom and ecu over and redrilling 1 mount ;)
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 66 guests