I have a Nissan AC kit for a GQ tb42 (new in box, was for my old car) and am in the process of buying a GQ TD42 vehicle that has no AC :(
Will most of the kit be ok, does anyone know parts that are different? ie is the compressor the same, pipes the same, mounting brackets...? I'm hoping I can get away with most of it and just get the few parts that are different from a wrecker.
Thanks for your help.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Will a A/C Kit for a TB42 fit a TD42?
the compressor, pipes, and that stuff is close enough to be the same. i have a TD42 where a TB42 used to live, and the full aircon system was retained in the vehicle without depressurising it.
Sorry but can't remember if the brackets to hold the compressor to the engine were the same. might have had to turn a hose a bit to go around the alternator or something similar, but i would be confident that in the main your kit will be fine (except compressor brackets unknown)
Sorry but can't remember if the brackets to hold the compressor to the engine were the same. might have had to turn a hose a bit to go around the alternator or something similar, but i would be confident that in the main your kit will be fine (except compressor brackets unknown)
Sounds good, yeah I expect something to be a little different on the front of the engine as I think the main pulley is different (trying to remember my old car). When I get around to doing it I'll update this post.
Thanks
I hadn't thought of that angle, ppl who have replaced TB42 with TD's. Good one.
Thanks
I hadn't thought of that angle, ppl who have replaced TB42 with TD's. Good one.
Im re-fitting Air con back onto a TD42 SWB I bought
for the TD42 there were 3 different kits that were put onto them, and each kit had a different wiring loom for it
there was
OE (Nissan)
OE (Local Nissan Dealer Fitted)
Aftermarket Kit fitted by auto electricians
Some models used flare fittings and some used O'ring fittings
Hope that helps
for the TD42 there were 3 different kits that were put onto them, and each kit had a different wiring loom for it
there was
OE (Nissan)
OE (Local Nissan Dealer Fitted)
Aftermarket Kit fitted by auto electricians
Some models used flare fittings and some used O'ring fittings
Hope that helps
Who is online
Users browsing this forum: No registered users and 72 guests