Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bull Bar Query

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 7
Joined: Fri Jul 02, 2004 3:30 am
Location: Melbourne

Bull Bar Query

Post by j-top »

Is there easy way to find out if a Bocar Alloy Bar for an 1997 NL GLS (with the flares as part of the guards)
Will fit a 93 NH j-top (with GLS Flares) before i buy it :)
Top
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

bar

Post by klrevo »

it should as far as im aware

dean. ;)
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Might not line up with the bodywork. NL has the "factory body lift" where the body sits higher on the chassis. NH doesn't.

If you're prepared to take the extra step it shouldn't be a big job to modify the height. Have a good look at how the bar mounts?
Top
Posts: 124
Joined: Thu Jan 02, 2003 9:34 pm
Location: Tyers

Post by Pharb »

Ah but, the factory bumper mounts must have been lifted to match the body. I put of fitting a 2nd hand ARB bar of a "low body" NH to my "high body" NJ because I never had time to muck around with lifting the mounts only to find it fitted on without needing to be lfted.

I think the only difference between GLX and GLS bars is slight notching on the inner rear corners of the wings to suit the factory flares.

If anything you may need to trim up the wings of the bar to suit the factory flares or (more likely) the bar may have more than enough clearance already.

Peter H
NJ Pajero 2.8TDI
Top
Posts: 7
Joined: Fri Jul 02, 2004 3:30 am
Location: Melbourne

Post by j-top »

Thanks for reply , i had a chat to friend at ARB and there seems to be a different bar just for the (GLS 97 + Exceed) model all other models will fit fine. But he is goingt o have a look at the tech specs for me.
If no good, I will have to keep hunting ebay :P
Top
Posts: 34
Joined: Fri Jun 04, 2004 5:37 pm
Location: rockhampton

Post by rot8s »

I will have a alloy bar for sale next week if I get my winch bar, on a 1996 NJ GLS with factory flares/plastic.

Interested in info for fitting a GLX steel bar to a GLS, so we think it should just require some notching to go around the flares..?
Top
Posts: 191
Joined: Sat Jan 18, 2003 6:23 pm
Location: melb

Contact:
Contact pickle

Post by pickle »

Try Get Wrecked 4x4 wreckers in Deer Park. Just came from there and they have a few NH and NJ GLS with bars on them. One even had a poly bar on it.
9360 5555
44 Westwood Dve Deer Park

Dave
Top
Posts: 7
Joined: Fri Jul 02, 2004 3:30 am
Location: Melbourne

Post by j-top »

Well i won the bar on ebay :)
have to hope it fits
My friend at ARB said the mounts for the gen 2 and 2.5 are identical the only difference is the wings (ie how much they come out for the flares)
So hopefully it fits and looks ok
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest