dose anyone know where i can get a spanner
for the wheel bearings on a gu
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
wheel bearing spanner
Re: wheel bearing spanner
keithGU42 wrote:dose anyone know where i can get a spanner
for the wheel bearings on a gu
ebay bud
http://cgi.ebay.com.au/Hub-Socket-3-8-N ... dZViewItem
Sorry the 54mm socket is for a Toyota bearing nut.
The ad says for GQ as well but GQ bearing nuts are 52mm!
A mate bought one of these 54mm off fleabay to do his GQ nuts and of course it rounded the nut and flared the socket out as well (rendering it useless) before it even got to the initial torque setting. Gee, wonder why?
And who puts a 3/8 drive hole in a thin plate socket that has to pre torque a nut to 140 odd ftlb?
Do yourself a favour, pay the 70 odd bucks and get the right size one from Bursons or somewhere thats good quality, like ABW or something and has a 3/4 drive.
Best ones are the Litchfield or SPX Tools ones if you can still get one. Drop forged strength and quality!
The ad says for GQ as well but GQ bearing nuts are 52mm!
A mate bought one of these 54mm off fleabay to do his GQ nuts and of course it rounded the nut and flared the socket out as well (rendering it useless) before it even got to the initial torque setting. Gee, wonder why?
And who puts a 3/8 drive hole in a thin plate socket that has to pre torque a nut to 140 odd ftlb?
Do yourself a favour, pay the 70 odd bucks and get the right size one from Bursons or somewhere thats good quality, like ABW or something and has a 3/4 drive.
Best ones are the Litchfield or SPX Tools ones if you can still get one. Drop forged strength and quality!
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
GU is the same as the GQ RX which has the locking nuts like this
http://cgi.ebay.com.au/Nissan-GU-Patrol ... m153.l1262
the gregories manuel has a diagram of a tool you can make to suit these, i can post up a scan of the diagram tongiht if you like.
basically its a flat piece of steel with 3 holes drilled in it, one in the center and the other 2 spaced to suit the 2 large holes on the wheelbearing nut.
http://cgi.ebay.com.au/Nissan-GU-Patrol ... m153.l1262
the gregories manuel has a diagram of a tool you can make to suit these, i can post up a scan of the diagram tongiht if you like.
basically its a flat piece of steel with 3 holes drilled in it, one in the center and the other 2 spaced to suit the 2 large holes on the wheelbearing nut.
Who is online
Users browsing this forum: No registered users and 2 guests