Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Flat spot?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 24
Joined: Mon Mar 03, 2008 1:57 pm
Location: Brisbane

Flat spot?

Post by D_77 »

hey guys,

just picked up 2.0L 1999 vitara and i experiencing a servere flat spot during acceleration. I have replaced the fuel and oil filter, flushed engine, new oil, new plugs and what not. cleaned the air flow sensor.

I put some 98 octane in it as well, with fuel treatment stuff and all that, and still i get a flat spot

3rd gets it bad, it will sit there like there is no fuel and suddenly you will get a torque band. it is the same with all the gears but most evident in 3rd.

just wondering what it would be?

thanks

dan
Top
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

dizzy, rotor button, leads?
Top
Posts: 24
Joined: Mon Mar 03, 2008 1:57 pm
Location: Brisbane

Post by D_77 »

its got coil packs :(

i might adjust the timing slightly
Top
Posts: 242
Joined: Tue Oct 09, 2007 9:54 pm
Location: Brisbane

Post by ScrawnC »

The timing is all computer controlled so there is nothing you can play with. How did you clean the air flow sensor? Your next step should probably be plugging in the computer and pulling any fault codes out. Might have a faulty sensor somewhere.
Top
Posts: 24
Joined: Mon Mar 03, 2008 1:57 pm
Location: Brisbane

Post by D_77 »

i adjusted the CAS just a second a go, it was a bit slow to rev up and after i adjusted it slightly it seemed better. i havent driven it yet.

a bloke said that it could be the head, needing a reco?

how would i got about getting a de-carb in the throttle body and all associated parts?

thanks
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Have you had the ECU checked for fault codes?

A dead oxy sensor can cause those symptoms- they start to respond to mixture changes more slowly resulting in surging problems.
David
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

It won't be the head or carbon.

It's a 99. If the head was bad enough you were loosing power, you'd have several small men with hammers inside your engine.

Could be 02 sensor, or camshaft angle sensor.

Get the diagnostics checked.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 242
Joined: Tue Oct 09, 2007 9:54 pm
Location: Brisbane

Post by ScrawnC »

Gwagensteve wrote:If the head was bad enough you were loosing power, you'd have several small men with hammers inside your engine.
Hahahahaha :rofl:
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 44 guests