Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

max boost for a 300 tdi

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 2298
Joined: Sat Jun 11, 2005 11:26 pm
Location: nsw maitland

max boost for a 300 tdi

Post by cooter »

i know its been asked before but search was useless i have done all the fuel pump tweaks and also respeced the pump but want to up the boost for a couple extra stallions what is safe on standard turbo and intercooler?
and what is max on a water to air system?
i was thinking about maybe 17 to 18 psi but wasnt sure about how it would handle it it has 200 000 on the clock
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
Posts: 410
Joined: Thu Aug 21, 2003 8:40 am
Location: Upper Hunter Valley NSW

Post by rick130 »

mine runs around 16.5-17 psi, and I wouldn't be comfortable going any further as it's done 240,000km and still the original head gasket.

From reports on the UK boards it sounds as if the head gasket is marginal above 17-18psi even when new, so if you wanted to go above this it'd pay to O ring the block or head.
300Tdi Defender 130 CC
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

I have had about 20 psi from the stock turbo with the wastegate held closed.

The problem is the stock compressor has poor efficiency at that pressure, The compressor wheel is creating a lot heat in the charge air, for not much gain in air flow.

I'm in the process of swapping the 300Tdi out of my rangie and when I get around to it will take the turbo from it and put it on my disco 300Tdi. That turbo has a compressor more suited for higher boost pressure. Both compressors are garrett M27 housings but the stock 300Tdi is A/R 48, vs A/R 52 on the better compressor.

I regretted not o-ringing the 300Tdi before I put it in the rangie. With the disco I am hoping to get ARP studs instead of the stock head bolts in the disco. I expect they will do the job. Just need to get some measurements to allow me to chase up the studs.

Edit: BTW, I read on another forum that the new rover head gaskets for the 300Tdi are all metal. That was news to me, so I hope it is correct.
John
Posts: 2298
Joined: Sat Jun 11, 2005 11:26 pm
Location: nsw maitland

Post by cooter »

i am actually contemplating changing the head gasket for the sake of it what is a vrs kit worth for these?
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
Posts: 410
Joined: Thu Aug 21, 2003 8:40 am
Location: Upper Hunter Valley NSW

Post by rick130 »

Bush65 wrote:<snip>

Edit: BTW, I read on another forum that the new rover head gaskets for the 300Tdi are all metal. That was news to me, so I hope it is correct.
read that a couple of times now, too.
It would be nice, particularly as mine is the thickest one, too. (no holes)
300Tdi Defender 130 CC
Posts: 25
Joined: Mon Mar 19, 2007 6:50 pm

Post by Russ-disco »

i can say that the new head gaskets are all metal i have just bought one for my car..
Posts: 2298
Joined: Sat Jun 11, 2005 11:26 pm
Location: nsw maitland

Post by cooter »

how much was it?
http://www.4wdaction.com.au/shed/index.php?id=1097&im=1
[quote="squik"]He He... every time I turn off my protection my box gets slammed with spam....
[/quote]
Posts: 25
Joined: Mon Mar 19, 2007 6:50 pm

Post by Russ-disco »

The head gasket was $72 and some change.Its the thickest one i think because i had to have my head faced again so not sure if others will be cheaper.Its an elring head gasket
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

Russ-disco wrote:The head gasket was $72 and some change.Its the thickest one i think because i had to have my head faced again so not sure if others will be cheaper.Its an elring head gasket
Thanks for the info - will get one in preparation.
John
Posts: 410
Joined: Thu Aug 21, 2003 8:40 am
Location: Upper Hunter Valley NSW

Post by rick130 »

I'm guessing the 300Tdi product spec will still be updated for a while to come until the UK army drop theirs. (I hope)
300Tdi Defender 130 CC
Post Reply

Who is online

Users browsing this forum: No registered users and 37 guests