Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
SuperPro polyurethane bushes
SuperPro polyurethane bushes
Anybody fitted any these front or rear? How they go for vibration dampening and noise? It looks like they do the full spread of bushes, at least for my '93 LWB (I cant find the front inner bushes for the front control arm anywhere else but from suzuki)
and they have caster correction sets
http://www.superpro.com.au/superpro_products.html
http://www.4wd1.com/I_replacement_bushes.htm
and they have caster correction sets
http://www.superpro.com.au/superpro_products.html
http://www.4wd1.com/I_replacement_bushes.htm
Superpro are a very good quality australian product, I use them in my commodore. However I've heard that rubber will flex better than urethane bushes in a 4wd application if that's what you're after.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
GRPABT1 wrote: However I've heard that rubber will flex better than urethane bushes in a 4wd application if that's what you're after.
This is what I thought too till I was rightly corrected. If you PM Bruceh on this forum he can supply urethane bushes that will flex as good as rubber but with better durability. I understand he makes them himself.
Well it really depends on how they are made, yes urethane can be made softer/flexier than rubber but I think you will find alot of the brands out there are marketed for motorsport which requires hardness ie: nolothane bushes are stupid hard.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Post up how you go. I am upgrading suspension and may need to replace some rubbers.Yeah I found that post. I've PM'ed Bruceh to see what he has to say.
The Superpro ones appear to be the softest of the easily avaliable poly bushes i can find and they make every bush including caster correction ones.
I used superpro bushes in a jeep I,m building , I got custom springs made and used suzuki large leaf spring bushes in each end , they flex fairly well considering it only has a 85 inch wheel base , It's a CJ-5 jeep , 350 chev , auto , Dana 60 F/R and double locked , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
I fitted a full set of superpro bushes to my sierra with greasable shackles. I found no real difference in flex or ride quality compared to the old rubber ones. They felt quite soft for urethane but still looked pretty durable.
And they dont squeak at all due to the greasable shackles, very smooth in their operation
And they dont squeak at all due to the greasable shackles, very smooth in their operation
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
How did you go with this PCRman?PCRman wrote:Yeah I found that post. I've PM'ed Bruceh to see what he has to say.ScrawnC wrote:This is what I thought too till I was rightly corrected.
The Superpro ones appear to be the softest of the easily avaliable poly bushes i can find and they make every bush including caster correction ones.
I'm still mulling it over.How did you go with this PCRman?
After spending a heap of time calling different suspension places I've come to the conclusion that only superpro and suzuki do full bush sets. Nolathane, pedders, kelpro etc don't do some of them. Unfortunately I never got any info from Bruceh (although he did send a blank PM at one point ).
The superpro and suzuki sway bar bushes aren't much different in price but the control arm, rear trailing arm and a-arm bushes are a heap cheaper from superpro.
Soooo, I will be going with superpro after I've paid for my wedding in 6 weeks and I stop being poor.
Pleasingly, by doing a strut mount flip and using the maximum adjustment on the strut mounts (by maximum i mean only about 2mm of play) I've managed to bring caster out to +1.5deg so i will only need the standard control arm bushes not the correction ones.
After the install I will post some pics and my impressions.
PCRMan try getting hold of bruce on either www.nbs4x4club.com or on www.auszookers.com
Who is online
Users browsing this forum: No registered users and 19 guests