Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1HZ timing belt

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 34
Joined: Thu Sep 21, 2006 8:46 pm
Location: MARGATE

1HZ timing belt

Post by CRUZERBOY »

can someone let me know how hard it is to change the timing belt on a 1hz please?
Top
Posts: 116
Joined: Thu Jul 06, 2006 10:31 am
Location: victoria, beechworth

Post by tuff4runner »

it is very ezy exept for the little spring!!! needs toyota tool to take off but u can do it dam ezy just folow manual or i may b able to send u how to do it if u like?
IF YOU OVER TAKE ME I WILL FOLLOW YOU HOME AND S*#T IN YOUR SLIPPERS
Top
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Contact:
Contact jimbo jones

Post by jimbo jones »

ya very easy just make shure its on TDC and dosent move while the belt is off
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Top
Posts: 253
Joined: Fri Dec 09, 2005 9:19 pm
Location: Melbourne

Contact:
Contact tom_286

Post by tom_286 »

jimbo jones wrote:ya very easy just make shure its on TDC and dosent move while the belt is off
Is it at TDC when the timing marks on the pully and gear line up with the marks behind them?
Its not a bundy!
Top
Posts: 34
Joined: Thu Sep 21, 2006 8:46 pm
Location: MARGATE

thanks

Post by CRUZERBOY »

thanks guys. if i have any drama's i will seek more help.
Top
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Contact:
Contact jimbo jones

Post by jimbo jones »

tom_286 wrote:
jimbo jones wrote:ya very easy just make shure its on TDC and dosent move while the belt is off
Is it at TDC when the timing marks on the pully and gear line up with the marks behind them?

yes
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Top
Posts: 309
Joined: Sun Apr 24, 2005 8:20 pm

Post by Thommo 73 »

you dont need the tool for the spring. a flat blade works well.
and turn the motor over twice and if the lines dont line up redo it.

it took me less than two hours to fit the injector pump/belt/injectors and retime it last nite so the belt should be pretty easy and less than 1hr.
1uzed and no home for it
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

i take it you didn't remove the front casing and ballancer then
plenty of parts on the bench
Top
Posts: 309
Joined: Sun Apr 24, 2005 8:20 pm

Post by Thommo 73 »

why would you need to?
1uzed and no home for it
Top
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

Easiest way to do the tensioner is to remove it from vehicle, put it into a pair of soft jaw vices, compress it, pin it closed with a small allen key, put back into truck, when ready remove allen key.

And its about a 20 min job on a 1KZ-TE or 1HD/1HZ series motor

Its a good 5hrs on an L series... :bad-words:
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Top
Posts: 309
Joined: Sun Apr 24, 2005 8:20 pm

Post by Thommo 73 »

that sounds complicated.... the toyota tool is just a bit of bent pipe with a handle to get the spring on.(work for toyota).
screw driver does the same thing without removing it the tensoiner.
1uzed and no home for it
Top
Posts: 243
Joined: Thu Jul 15, 2004 9:21 am
Location: Townsville

Post by Dane »

ferrit - it is a tension spring mate :? .
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests