Hi Forum,
Is it a bolt-on upgrade to an NH for NK/ NL GLS 314mm vented discs (24mm thick) twin piston calipers (42.8mm pistons)? (yes I will be running 16" wheels)
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
NH 2.6 Petrol brake upgrade?
Moderator: -Scott-
Read here:
http://www.4x4wire.com/forums/showflat. ... art=1&vc=1
http://www.4x4wire.com/forums/showflat. ... 14&fpart=1
http://www.4x4wire.com/forums/showflat. ... art=1&vc=1
http://www.4x4wire.com/forums/showflat. ... 14&fpart=1
1989 LWB Exceed
3.2 DiD
5-spd manual & SuperSelect
2" body lift
33" Bridgestone D694 ATs
Front Runner Roof Rack
Bilstein Shocks
3.2 DiD
5-spd manual & SuperSelect
2" body lift
33" Bridgestone D694 ATs
Front Runner Roof Rack
Bilstein Shocks
Hi thanks for that .. but those links are more a Gen 1 upgraded with Gen 2 brakes.
Given that there are 2 different front brake packages used across the Gen 2 Pajero's , I would like to make sure that upgrading the NH (Smaller brakes) to the NJ / NK (Larger brakes) is a bolt on and that there was no other major changes, also I would like to know what parts to grab from the wreckers ie calipers and discs (of course), but is there any other components to chase like different booster or master cylinder, caliber mounts, ect.
Cheers,
Given that there are 2 different front brake packages used across the Gen 2 Pajero's , I would like to make sure that upgrading the NH (Smaller brakes) to the NJ / NK (Larger brakes) is a bolt on and that there was no other major changes, also I would like to know what parts to grab from the wreckers ie calipers and discs (of course), but is there any other components to chase like different booster or master cylinder, caliber mounts, ect.
Cheers,
Who is online
Users browsing this forum: No registered users and 2 guests