thinking of doing a SAS in my paj and using a lux diff.
needs to be 5.29 also.
question is, how strong are lux diffs? how big(tires) can you go before you start breaking stuff?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
lux diffs - how strong?
Moderators: toaddog, Elmo, DUDELUX
lux diffs - how strong?
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Thats a pretty broad question...
How long is a piece of string...
Basically alot depends on your driving style, but 5.29's have a really small pinion and are the weakest of the lux diffs....
I know alot of people that run 33's-35's without any problems....
Brad
How long is a piece of string...
Basically alot depends on your driving style, but 5.29's have a really small pinion and are the weakest of the lux diffs....
I know alot of people that run 33's-35's without any problems....
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
if you have a heavy right foot or do things like step off the clutch at full lock trying to jump out of a rut the std CV's and axles tend to go BANG! or the hub gears, ive seen pics on pirate 4x4 where the 3rdmember has snapped all the studs on the housing and the standard housing apparently bend at the knuckle's or from the 3rd member to the left hand side, hense all the trussing and gusset kits available,
build them right and treat them right i recon there good. altough would go gq's if i went coil's.
can u use MQ's there cheap enough
build them right and treat them right i recon there good. altough would go gq's if i went coil's.
can u use MQ's there cheap enough
a mate just did TTC in his sierra with a lux diff in the front and 39s.
but his zook is a fair bit lighter than the paj and he was running longfeilds . the engine power is about the same.
id want an auto.
my driving style is i have a heavy right foot
but his zook is a fair bit lighter than the paj and he was running longfeilds . the engine power is about the same.
id want an auto.
my driving style is i have a heavy right foot
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
the paj already has 33s on it and id want to go at least 37s or biggerbrad 93hilux wrote:
I know alot of people that run 33's-35's without any problems....
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
longs would definately be going in if i used a lux diff.v840 wrote:With 37s Id say youd need to go longs.
cap51z has them under his zook but its a lot lighter than the paj
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
wel i was running 35's 4.88's std axles F+R and never had a problem except for shitting 2 pinion seals... that was under my 2.4boosted 4runner, that i used to hold flat to the boards (but you have to do that with the 2L) LoL
but now its in buits slowling getting built, ive fully trussed the front axle, got TG's chromo rear axles, 30 splines, hub gears all the other crap.. i want to run 37's or 38.5's now the weak point will be the imput shft out of the g52 into the twins, or the ring and pinion
but now its in buits slowling getting built, ive fully trussed the front axle, got TG's chromo rear axles, 30 splines, hub gears all the other crap.. i want to run 37's or 38.5's now the weak point will be the imput shft out of the g52 into the twins, or the ring and pinion
j-top paj just go to the Locktup4x4 website as they distribute
Trailgear in Aust. & believe me you'll only buy it once!
It is some strong stuff. I was in the U.S. last week for the
Tin Benders jambo & saw some crazy drives & the Trailgear
stuff was up to the challenge..
Jeff
Trailgear in Aust. & believe me you'll only buy it once!
It is some strong stuff. I was in the U.S. last week for the
Tin Benders jambo & saw some crazy drives & the Trailgear
stuff was up to the challenge..
Jeff
rover money pit on mogs !!!
Re: lux diffs - how strong?
BUILT they are as good as you will get $v$ before going DANA60 or hybrid and stronger than anything nissan has to offer!j-top paj wrote:thinking of doing a SAS in my paj and using a lux diff.
needs to be 5.29 also.
question is, how strong are lux diffs? how big(tires) can you go before you start breaking stuff?
yes they do cost $$ to build tuff, but well worth it as there is sooooooo much stuff available for them, and sooooo many different options available (hi pinion / low pinion / hi-steer / 6shooter knuckles . . . . . . . .)
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Yep, marginally but they are stronger...Remydog05 wrote:So Am I right in saying that 4.8's and or 4.5s would be likley to be stronger than the 5.12??
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Who is online
Users browsing this forum: No registered users and 2 guests