Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

why isn't my rd2.8td starting when hot ??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 195
Joined: Sun Apr 20, 2008 10:10 pm
Location: sunshine coast

why isn't my rd2.8td starting when hot ??

Post by patrol28 »

hopefully someones had this problem b4 . my 96 gq 2.8 td is getting harder to start when hot. it i've tested both glow relay's even cleaned the contacts tested all glow plugs all dead short as there meant to be..
replaced the injectors and now thinking its a injector timing or valve problem has been dyno tuned and all was well any idea's ?????????????
please help someone must have had this prob there's a carton on offer...
Posts: 349
Joined: Tue Nov 12, 2002 5:40 pm
Location: Central Coast NSW

Post by hophoar »

Yep, it's the injector pump wearing, you'll need to get an advance plate from Nissan that'll cost you around $60 including a new o ring.
That'll be a carton of Tasman for the diagnosis.
Posts: 156
Joined: Tue Feb 21, 2006 11:41 am
Location: NSW......West of the Sandstone Curtain

Post by ST391GQ »

http://www.patrol4x4.com/forum/showthread.php?t=6428


Try this link ....hope it works...
A six pack of woodys would be nice ;) :D

Cheers Keith
Nuthin is ever the same once I own it !!
Posts: 25
Joined: Thu Jun 21, 2007 9:00 pm

Post by bop smoo gu »

Rip the car in to Motsons @ moorooka. they will supply and fit the mod plate for around the $60 mark. I had mine done and then managed to pick up a pump with 66,000km on it so the modded one has become a back up.
Posts: 195
Joined: Sun Apr 20, 2008 10:10 pm
Location: sunshine coast

Post by patrol28 »

bop smoo gu wrote:Rip the car in to Motsons @ moorooka. they will supply and fit the mod plate for around the $60 mark. I had mine done and then managed to pick up a pump with 66,000km on it so the modded one has become a back up.
i have looked into this plate before its only for the GU electronic injection the GQ is mechanical. so im told .. and the problems not solved yet so dont bother cleaning out the fridge just yet..

i guess motsons sounds like go im heading done that way to put the truck on the ramp on sat might try call in ...
Posts: 195
Joined: Sun Apr 20, 2008 10:10 pm
Location: sunshine coast

Post by patrol28 »

okk i've been thinking and since everbody said its an advance plate that i need and i m pretty shore thats for GU ive started playing with the tuning since mines mech inj . i advanced the fuel pump timing (while running) until it started to sound like sh!!t then went back a little .. im currently testing and sofar so good fingers crossed so ill bye me a box then hay
Posts: 1288
Joined: Wed Sep 12, 2007 5:09 pm
Location: Glass house sunny coast

INJ PUMP

Post by purplebus »

I have a 2.8 gq inj pump at my place if you want to swap and give it a go for a week or so. you are welcome to try it if you want to do the swap over.make me an offer if is good and of use to you. it came of a good truck. i am in maroochy.
only the first roll hurts, then its a ride..
Posts: 195
Joined: Sun Apr 20, 2008 10:10 pm
Location: sunshine coast

Re: INJ PUMP

Post by patrol28 »

purplebus wrote:I have a 2.8 gq inj pump at my place if you want to swap and give it a go for a week or so. you are welcome to try it if you want to do the swap over.make me an offer if is good and of use to you. it came of a good truck. i am in maroochy.
thanks for the offer
at the moment ("while it still run's") im trying to find & fix the problem and if i don't i should have a better understanding of every little bit of the 2.8 by the sounds of it im going to have a few "issues".. you might hear from me shortly if i crack the ships... fingers crossed ....
my mate had a 4.2 he used for winch challanges and warned me not to go near the 2.8 so now i have to get it cranking or cop it ..
Posts: 1288
Joined: Wed Sep 12, 2007 5:09 pm
Location: Glass house sunny coast

Re: INJ PUMP

Post by purplebus »

patrol28 wrote:
purplebus wrote:I have a 2.8 gq inj pump at my place if you want to swap and give it a go for a week or so. you are welcome to try it if you want to do the swap over.make me an offer if is good and of use to you. it came of a good truck. i am in maroochy.
thanks for the offer
at the moment ("while it still run's") im trying to find & fix the problem and if i don't i should have a better understanding of every little bit of the 2.8 by the sounds of it im going to have a few "issues".. you might hear from me shortly if i crack the ships... fingers crossed ....
my mate had a 4.2 he used for winch challanges and warned me not to go near the 2.8 so now i have to get it cranking or cop it ..
to easy. we probably have seen each other about. mine is the purple gq wagon. we will be leaving for the allterrain at cruiser 2morrow lunch so prob see you out there if you are going.say gday if you are out. good luck.
only the first roll hurts, then its a ride..
Post Reply

Who is online

Users browsing this forum: No registered users and 37 guests