just looking for some answers about running 35 / 36 simex on a gu with a 3 inch spring lift ie what needed to be done if anything and where they hit if they do
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gu tyre question
Re: gu tyre question
http://www.outerlimits4x4.com/phpBB2/search.phpnarns1mav wrote:just looking for some answers about running 35 / 36 simex on a gu with a 3 inch spring lift ie what needed to be done if anything and where they hit if they do
thanks
Im running 35" simexs on 16 x8 rims witha 4" lift and dont have a problem and i dont see you hving a problem with a 3" lift. It might just scrape on the inner rear gauds on full flex but only just. Nothing to worry about.
Was at the local 4x4 shop the other day and lined up 35" simex with the 36" and you would be lucky if there was 1/4 inch between them.
Go either way and you wont have a problem.
Fantastic tyre you wont be dissapointed.
Was at the local 4x4 shop the other day and lined up 35" simex with the 36" and you would be lucky if there was 1/4 inch between them.
Go either way and you wont have a problem.
Fantastic tyre you wont be dissapointed.
Who is online
Users browsing this forum: No registered users and 3 guests