Has anybody managed to find a good place to get some replacement bump stops. I’ve tried a few suspension shops and they all say no. Rang Mitsi spare parts and they want $191.20 each.
I’m after the rubber stop inside the coil.
Any help would be good as, I don’t have much rubber left. (Its an old pic…. there is half as much rubber now)
Thanks,
Dave
--
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Replacement Rear Bump Stop (Inside Coil)
Moderator: -Scott-
Replacement Rear Bump Stop (Inside Coil)
93 NH - Custom Bar - Uniden GPS 205 - IPF Spoties - The Blue Smoke Comes Standard
http://www.mpdconstructions.com
http://www.whiteovergreen.com
http://www.mpdconstructions.com
http://www.whiteovergreen.com
Gee - you can get fancy swanky hydraulic ones for that price!
But are they needed? I know my shorty doesn't have them and the NL LWB I wrecked didn't have them either. Just the tapered one to the left of the spring in your pic.
But are they needed? I know my shorty doesn't have them and the NL LWB I wrecked didn't have them either. Just the tapered one to the left of the spring in your pic.
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
I forgot to reply to the thread,
Pedders do have them, Part No: 5899 Pedders Bump Stop
Havn't got price yet, to busy with the rest of the suspension
A Metric 17 socket up the middle will get it out. There is a bolt that holds it in.
Got pictures if required.
Pedders do have them, Part No: 5899 Pedders Bump Stop
Havn't got price yet, to busy with the rest of the suspension
A Metric 17 socket up the middle will get it out. There is a bolt that holds it in.
Got pictures if required.
93 NH - Custom Bar - Uniden GPS 205 - IPF Spoties - The Blue Smoke Comes Standard
http://www.mpdconstructions.com
http://www.whiteovergreen.com
http://www.mpdconstructions.com
http://www.whiteovergreen.com
its only there to guide the spring back into position after full articulation. with out it the springs tend to fall out. happened plenty of times on my ng pajero(they dont have them)M1S3RY wrote:It's called a "helper/assist spring" and i think it just softens the blow that the bump stop takes.
cheers murray
Who is online
Users browsing this forum: No registered users and 16 guests