Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Has anybody managed to find a good place to get some replacement bump stops. I’ve tried a few suspension shops and they all say no. Rang Mitsi spare parts and they want $191.20 each.
I’m after the rubber stop inside the coil.
Any help would be good as, I don’t have much rubber left. (Its an old pic…. there is half as much rubber now)
Thanks,
Dave
--
93 NH - Custom Bar - Uniden GPS 205 - IPF Spoties - The Blue Smoke Comes Standard
http://www.mpdconstructions.com
http://www.whiteovergreen.com
Gee - you can get fancy swanky hydraulic ones for that price!
But are they needed? I know my shorty doesn't have them and the NL LWB I wrecked didn't have them either. Just the tapered one to the left of the spring in your pic.
Any Pedders store will have them. For your quoted price I would think that you could get a pair. I replaced mine and and think that without them you may get some extra travel, but you would know about it when you bottom out.
My NH pajero is missing the ones youare talking about, so i am also interested in where we can get some, maybe a wrecker, but how would you get them out easily hehehe.
M1S3RY wrote:It's called a "helper/assist spring" and i think it just softens the blow that the bump stop takes.
its only there to guide the spring back into position after full articulation. with out it the springs tend to fall out. happened plenty of times on my ng pajero(they dont have them)
cheers murray