Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

will the rear shocks fit

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

will the rear shocks fit

Post by matthewK »

will the rear shocks from a 1981 40 Landcruiser fit the rear of a 60-62 series landcruiser??
1995 land rover disco on 265 muddies
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

40 series rear shocks are the same as the 60 series made up to 1986. These shocks are to suit 16mm mounting pins. Some time during 1986 the pins on the 60 series were changed to 19mm.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Post by matthewK »

sweet cheer made right choice then :)
1995 land rover disco on 265 muddies
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Post by bj42turbo »

I thought is was you who bid on my shocks :D


BJ
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Post by matthewK »

Sixty's Guy wrote:40 series rear shocks are the same as the 60 series made up to 1986. These shocks are to suit 16mm mounting pins. Some time during 1986 the pins on the 60 series were changed to 19mm.

my 83 60 has 19mm pins i should of checked cheers anyway dazz
1995 land rover disco on 265 muddies
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

Thats weird. My 83 HJ60 has 16mm pins. According to the ARB and Ironman Ctalogues the 19mm pins were 86 (might have been 85?) and on?
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

Dragging this one up from the dead.......

I found today that OME make a bush to convert small eye shocks to fit onto the 19mm pins. Part number is OMEB9.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests