Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

75 series ute 1hdt, no drive in front

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 4
Joined: Thu Apr 10, 2008 6:30 pm
Location: brisbane

75 series ute 1hdt, no drive in front

Post by biggsie »

my 75 ute hasnt't got any drive in the front. i cant put my finger on what it could be. cv's, diff centre are all ok.drive shaft doesn't appear damaged and is still turning on throttle. got any ideas
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

lock the hubs in ? :D
xxxx wrote:
:bad-words: :snipersmile:
Top
Posts: 612
Joined: Wed Feb 11, 2004 6:50 pm
Location: Perth / Laverton

Post by Zeyphly »

In 2wd with the hubs locked in can you turn the shaft by hand?
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Top
Posts: 4
Joined: Thu Apr 10, 2008 6:30 pm
Location: brisbane

Post by biggsie »

yeah mate i locked in the hubs, shaft doesn't move anymore than 1/8th of a turn in either direction.
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

What gearbox are you using?

With the H55f, the selector can become worn. When i put mine in L4, i have to then pull the lever back slightly to engage 4wd properly. Never had a problem with H4 :?

Selectable low range 2WD can be handy though :P
Top
Posts: 4
Joined: Thu Apr 10, 2008 6:30 pm
Location: brisbane

Post by biggsie »

im not sure what gearbox it is, im assuming its standard issue for my truck. when L4 is selected it makes a grinding noise when u put load on it
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

biggsie wrote:im not sure what gearbox it is, im assuming its standard issue for my truck. when L4 is selected it makes a grinding noise when u put load on it
Try wrenching back towards you on the transfer lever, see if it'll engage - might need to feather the clutch whilst doing this. Have you got a body lift? This could also be causing clearance issues (body->lever)
Top
Posts: 4
Joined: Thu Apr 10, 2008 6:30 pm
Location: brisbane

Post by biggsie »

il have to give it a go. i've only got 4" suspension lift, no body lift that im aware of.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

i would say the shifter is just sitting in neutral, needs a bit more of a nudge
hands and mums dont count!!!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest