Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Help needed mounting side steps - got pics?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Help needed mounting side steps - got pics?

Post by matthewK »

i bought the landcruiser and the guy has tech screwed the side steps/brash bar into the body , i need to see how they are properly mounted so i can fix this stupid stuff up

cheers

Edit: translated the subject.
1995 land rover disco on 265 muddies
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

oddly enuf, thats not at all unusual a way to affix them...... it you dont like it attached to your body, get some sliders
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

tech screws are ftw! my cars body loves tech screws :armsup: :armsup: :armsup:
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Top
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Post by matthewK »

i want some way of putting them to the chassi as a slider and not tech screwed tot he body point is to protech the body not destroy it
1995 land rover disco on 265 muddies
Top
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

Post by cruiser60series »

old cruiser i used to have had them welded to the chassis. Simple and solid but i cut them off leaving jagged points to smack my head on everytime i got under the car.
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Just have a look under any 4bee fitted with ARB steps and copy the large U bolt idea.

Bazzle
Top
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Post by matthewK »

i got u bolts but jusdt need to understand how its done
1995 land rover disco on 265 muddies
Top
Posts: 282
Joined: Tue Apr 15, 2003 12:56 am
Location: Queanbeyan NSW

Post by Matt N »

SWB Jeeps are popular for having sill protection bolted to the bodywork. It's not dodgy at all, it's strong when designed well and doesn't impeded ground clearance. Warn, ARB plus a whole lot of other US suppliers make this type of sill protection commercially.

Lots of sliders here, mostly welded
http://www.4x4wire.com/toyota/tech/sliders/

Opposite Lock
http://www.oppositelock.com.au/detail.a ... ixkey=7092
i got u bolts but jusdt need to understand how its done
Brief instructions:
Your u-bolts need a square U, not a round U, and need to be large enough to wrap around your chassis rail. You need 2 u-bolts per mount. Hook your u-bolts around your chassis so the threads face outwards. Weld the arms of your sliders to some plate, drill four holes into the plate to match the spacing of your u-bolts. Bolt it all up.

Mine are not mounted with u-bolts. Instead there is another plate on the inside of the chassis rail which effectively sandwiches the chassis between that plate and the outer one that the slider arm is welded to. 4 high tensile bolts pull the plates together.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 55 guests