Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

nissan gq diff strength.

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 6
Joined: Thu Jan 12, 2006 9:23 pm

nissan gq diff strength.

Post by qwikcorty »

Just doing some research before buying parts, if i were to build strong motor 500+hp, how well would the gq diffs like being abused taking off with heaps of grip in the dry in 4x4 ? Has anyone heard of people drag racing there patrols? Mainly interested in how much abuse they can take in a drag racing enviroment.
Posts: 897
Joined: Tue Aug 02, 2005 2:31 am
Location: Central Coast

Post by MyGQ »

Th GQ CV won't handle this too well, the Diff itself will take it, but the CV will just go bang

You will want a GU front end as they have a stronger CV joint in them
AA's for Quitters
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

I have over 500 hp with standard GQ drive train including CV's. The CV's have so far completed 2 (well finished one) comps without a problem. I do drive accordingly and are careful when the front locker goes in but the cv have handled it. I have blown to freewheel hubs since October last year when I got it going but that isn't bad. I have an auto and have done a bit to that and the auto does take the shock loading out so that helps.
Apart from cro-moly CV's I have no plans to change anything else as it is all strong enough.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

Forget about drag`racing in 4x4
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

stool wrote:Forget about drag`racing in 4x4
Yeah thats about right, have a look a any serious drag GTR skyline, they usually all run in rear wheel drive, and they're awd standard.

driving all 4 wheels uses up too much power in that application, also under hard acceleration theres hardly any weight on the front.
You'd be better off spending your time with sticky tyres and good suspension.
There are no stupid questions, but there are a LOT of inquisitive idiots
Posts: 6
Joined: Thu Jan 12, 2006 9:23 pm

Post by qwikcorty »

my plans are not to drag race it as such, i was just interested if they would hold up in that situation. thanks for the replys
Posts: 6
Joined: Thu Jan 12, 2006 9:23 pm

Post by qwikcorty »

i forgot to ask, how strong is the transfer case? Are they known for breaking?
Posts: 965
Joined: Fri Mar 26, 2004 10:09 am
Location: B.F.E

Post by RMP&O »

qwikcorty wrote:i forgot to ask, how strong is the transfer case? Are they known for breaking?
Marks 4wd seem to have changed their site around....but for a long time they stated clear as day on the website the Patrol drivetrain (all of it) was fully capable of handling v8 power.
www.rmp-o.com
Posts: 75
Joined: Tue May 23, 2006 1:19 pm
Location: brisbane

Post by evo wagon »

Patroler wrote:
stool wrote:Forget about drag`racing in 4x4
Yeah thats about right, have a look a any serious drag GTR skyline, they usually all run in rear wheel drive, and they're awd standard.

driving all 4 wheels uses up too much power in that application, also under hard acceleration theres hardly any weight on the front.
You'd be better off spending your time with sticky tyres and good suspension.
they run in rwd as the centre diff has been set up in such a way that it splits the power to the rear by 80/20 so 80 percent to the rear and 20 percent to the front. thats y the gtr's launch so hard out of the whole.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests