Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Driving lights

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 6974
Joined: Fri Nov 14, 2003 3:14 pm
Location: Wollongong

Post by ferog »

DOH! oh well, I will get a pic tommorrow hopefully when dying in 38 degree heat at jenolyn in my car by myself.
;)
Top
Posts: 680
Joined: Tue Aug 26, 2003 3:02 pm
Location: Earlwood, Sydney

Post by ShinyDiscoBalls »

Heh.... I wired my spoties myself and had problems with blowing fuses... so I took off the inline fuse out of frustration and they worked... except I got an electrical fire.... so I ripped off all the wiring and am just going to take them in to someone to wire up.

I will also be alone in the truck for the trip... everyone seems to care more about this xmas thing than having fun in the sun... :roll: :roll: :roll:

Should be a blast.
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
Top
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

you were blowing fuese and got an electric fire cause you had a short somewhere.. figure that out, and problem solved
Top
Posts: 680
Joined: Tue Aug 26, 2003 3:02 pm
Location: Earlwood, Sydney

Post by ShinyDiscoBalls »

The problem is solved now Robbie... in a fit of rage I ripped out all the wiring... :x :bad-words: :x if it ain't wired it aint broken... ;)
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
Top
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

:lol: ah well
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

Driving lights should be easy to wire....... what went wrong??!!!!??

One side of the relay coil goes to the back of the highbeam globe (find wire with 12v when highbeam on), the other side goes inside the cabin and via a switch to the chassis. Run a fuse (~ 20-25Amp) and heavy duty wire from the battery to one side of the relay contacts, run two seperate wires from the other side of the contacts to the lights (one wire for each light). Then run another heavy wire from each light back to the battery grounding point on the chassis behind the battery. Job done!
David
Top
Posts: 680
Joined: Tue Aug 26, 2003 3:02 pm
Location: Earlwood, Sydney

Post by ShinyDiscoBalls »

Dave....

What you wrote comes across like this to me...

"Blah blah blah blah highbeam blah blah blah blah relay blah blah...."

I'm like water.... don't mix well with electricals..... :idea:
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
Top
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

FerociousFeroza wrote:Dave....

What you wrote comes across like this to me...

"Blah blah blah blah highbeam blah blah blah blah relay blah blah...."

I'm like water.... don't mix well with electricals..... :idea:


leave it to the pros then :D
Top
Posts: 680
Joined: Tue Aug 26, 2003 3:02 pm
Location: Earlwood, Sydney

Post by ShinyDiscoBalls »

Yup.... I can fit a carby kit to a holley 4 barrell in under 20 mins but i can barely change a light globe....
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
Top
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

FerociousFeroza wrote:Yup.... I can fit a carby kit to a holley 4 barrell in under 20 mins but i can barely change a light globe....


dude, thats 19 minutes too long :finger: :armsup:
Top
Posts: 680
Joined: Tue Aug 26, 2003 3:02 pm
Location: Earlwood, Sydney

Post by ShinyDiscoBalls »

AHHHHHH EAT STUFF :finger: :finger: :finger: :finger:
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
Top
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

only kidding champ :cool:
Top
Posts: 680
Joined: Tue Aug 26, 2003 3:02 pm
Location: Earlwood, Sydney

Post by ShinyDiscoBalls »

:rofl:
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

FerociousFeroza wrote:Dave....

What you wrote comes across like this to me...

"Blah blah blah blah highbeam blah blah blah blah relay blah blah...."

I'm like water.... don't mix well with electricals..... :idea:


Fair enough; best you don't touch anything electrical then apart from the ignition switch and radio! :D
David
Top
Posts: 6974
Joined: Fri Nov 14, 2003 3:14 pm
Location: Wollongong

Post by ferog »

Not that i know anything about electrics :oops: , but my uncle tried to wire his lights in and put the wrong sized amp in and the wiring caught on fire?
Anyway I did'nt need to say that as you all know these things :D .........................................................I am bored .
Top
Posts: 6974
Joined: Fri Nov 14, 2003 3:14 pm
Location: Wollongong

Post by ferog »

lightforce 140's
Top
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

I have a set of Nightstalkers. Cost me round $170 and I haven't come across anything much brighter...have only had to replace 1 bulb in 2 years, was a 10 minute job, and that was because I welded something on the car without disconnecting the batter :D :lol:
Top
Posts: 6974
Joined: Fri Nov 14, 2003 3:14 pm
Location: Wollongong

Post by ferog »

While we are on the topic, I have this image of my feroza with 3x narva rectangular ultima's running along a bar on the top of the roof , I know it's unnecessary but for the aww factor and the light power- has anyone else done it? This is a minor priority. :roll:
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 1 guest