Hi
Just after a place in brisbane that does custom bar work. I want to get a winch bar and slidders for my GQ SWB.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Custom bar work wanted
Custom bar work wanted
2002 GU 3lt wagon 5" lift, reduction gears, 35" MTZ...
'94 Suzuki Sierra SWB 5" lift, 30" MT 's and a winch to pull the bigger trucks through....
'94 Suzuki Sierra SWB 5" lift, 30" MT 's and a winch to pull the bigger trucks through....
Ring Dave, he is on this board. user name 80lsy GQ
Plenty of testament here too
http://www.patrol4x4.com/forum/showthread.php?t=4758
Plenty of testament here too
http://www.patrol4x4.com/forum/showthread.php?t=4758
2Dextreme. Comp prooven n good prices. www.2dextremefabrications.com.au
LRP Fabrications - Adam 0417724127
good prices awesome quality. see his gq on www.4wdmonthly.com.au
in the build up section.
cheers
good prices awesome quality. see his gq on www.4wdmonthly.com.au
in the build up section.
cheers
Posts: 678
Joined: Sun Dec 29, 2002 8:47 pm
Joined: Sun Dec 29, 2002 8:47 pm
Location: Queensland is there any other state apart from pissed?
Contact:
MY ASS!!!nastytroll wrote:2Dextreme. Comp prooven n good prices. www.2dextremefabrications.com.au
Good prices yes, but first time i did a double line pull on a 10,000 bent the absolute shit out of the front of the bar considering it was only about 4mm mild steel, might be okay for pansies who drive their truck on tracks but use your truck as a decent 4wd and you will be disapointed.
Wasn't impressed one bit, i would not recommend them.!!
Superior Alignments is better gear, frigen heavy but strong.
Dont know about the other guys.
I think you'll find Dale does awesome work and you probly got what you ordered.demon dude wrote:MY ASS!!!nastytroll wrote:2Dextreme. Comp prooven n good prices. www.2dextremefabrications.com.au
Good prices yes, but first time i did a double line pull on a 10,000 bent the absolute shit out of the front of the bar considering it was only about 4mm mild steel, might be okay for pansies who drive their truck on tracks but use your truck as a decent 4wd and you will be disapointed.
Wasn't impressed one bit, i would not recommend them.!!
Superior Alignments is better gear, frigen heavy but strong.
Dont know about the other guys.
This exo was done by dale and has been flopped and not even a scratch......
Maybe it was your driving style....
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Post like yours a pointless cause Dale's work is Great and your tryin to drag down a Good bloke tryin to make a living for him self. So unless your goin to call and talk to Dale STFU...demon dude wrote:Yes i did get what i ordered, a winch bar, it just could'nt handle the winch pretty pointless hey
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
If there was a problem I'm sure Dale would fix it straight away, Dale at 2dextreme has been building bar work n comp trucks for years, alot are top runners in winch and outback challenges. Yours would be the first complaint I've heared of.WICKED wrote:Post like yours a pointless cause Dale's work is Great and your tryin to drag down a Good bloke tryin to make a living for him self. So unless your goin to call and talk to Dale STFU...demon dude wrote:Yes i did get what i ordered, a winch bar, it just could'nt handle the winch pretty pointless hey
Youd probably find a double line 10k pull would bend most barwork... at full noise assume some loss in force your pulling 18 - 19,000 lbs, plus whatever is holding you to the ground in the first place.demon dude wrote:MY ASS!!!nastytroll wrote:2Dextreme. Comp prooven n good prices. www.2dextremefabrications.com.au
Good prices yes, but first time i did a double line pull on a 10,000 bent the absolute shit out of the front of the bar considering it was only about 4mm mild steel, might be okay for pansies who drive their truck on tracks but use your truck as a decent 4wd and you will be disapointed.
Wasn't impressed one bit, i would not recommend them.!!
Superior Alignments is better gear, frigen heavy but strong.
Dont know about the other guys.
Cheers,
Dan.
[i]1996 HDJ80R[/i]
Dan.
[i]1996 HDJ80R[/i]
Yes you fellas are probably right i would have just assumed that if TJM and ARB sell standard winch bars that can mount 9,000-12,000 lbs winchs and also sell pully blocks to go with them 18,00-24,000lbs (max 12 tonne approx) that other manufacted bars could handle the same. Obviously i was wrong 
Next time i'll go for a ARB bar or similar. Any way it was only my experience i had and this isn't a post about who was the best or worst in bar work i posted my experience i didnt state that 2dextreme did shit work i just stated i would not recommend them and i was pissed off.
The bar was good quality in workmanship and cheap it just did not do as i expected.
I am sure if you fella's asked in other posts how the goods you purchased are you would like the truth.
Maybe i was unlucky with the purchase as it seems all others are happy???
But anyway i'll go with ARB next time.
Next time i'll go for a ARB bar or similar. Any way it was only my experience i had and this isn't a post about who was the best or worst in bar work i posted my experience i didnt state that 2dextreme did shit work i just stated i would not recommend them and i was pissed off.
The bar was good quality in workmanship and cheap it just did not do as i expected.
I am sure if you fella's asked in other posts how the goods you purchased are you would like the truth.
Maybe i was unlucky with the purchase as it seems all others are happy???
But anyway i'll go with ARB next time.
RE BENT BAR.
Hey Demon,about your comments on your bar work no i am not about
to bag you for it.
What i would loke to say is if people in business do a job they should be told so if a problem happens it is VERY important that they know it.
From the view of a sales manager i like to know when we have done
well and when we havent & no i dont have any 2d products i am
researching bits for my 91 gq troll thats how i found this thread.
Please talk to them im sure they will help.
Cheers.
to bag you for it.
What i would loke to say is if people in business do a job they should be told so if a problem happens it is VERY important that they know it.
From the view of a sales manager i like to know when we have done
well and when we havent & no i dont have any 2d products i am
researching bits for my 91 gq troll thats how i found this thread.
Please talk to them im sure they will help.
Cheers.
It's all about the lines you take
Demon Dude re 2dextreme products
Hi Demon
This is the first we have heard about any problems such as yours, and yes we would appreciate feedback of our products good or bad.
It would be appreciated that the complaint would be made to us at first point as we would have found a way of compensating your troubles whatever they maybe.
Do not hesitate in calling us to have this resolved.
Dale
This is the first we have heard about any problems such as yours, and yes we would appreciate feedback of our products good or bad.
It would be appreciated that the complaint would be made to us at first point as we would have found a way of compensating your troubles whatever they maybe.
Do not hesitate in calling us to have this resolved.
Dale
Re: Demon Dude re 2dextreme products
2dextreme wrote:Hi Demon
This is the first we have heard about any problems such as yours, and yes we would appreciate feedback of our products good or bad.
It would be appreciated that the complaint would be made to us at first point as we would have found a way of compensating your troubles whatever they maybe.
Do not hesitate in calling us to have this resolved.
Dale
Good Work!! Who is online
Users browsing this forum: No registered users and 0 guests